petrol
, LP gas and glue etc in the refrigerator.
3. Don’t splash water on the refrigerator; it may
cause malfunction or electric shock.
4. If gas leaks from its container. Do not pull the
plug out or in as it may arose sparks and fire
calamities.
Instructions for Use
1. When operating the refrigerator for the first time,
run it without loading any food until it
s
auto
tops at the desired temperature. Usually it takes
2 or 3hours, then set the thermostatic dial at the
setting desired and
then load
the refrigerator.
2. The temperature of the refrigerator can be
adjusted by turning the thermostatic dial. A
medium setting of the thermostatic dial is the
most suitable for general operation.
3. Defrost the freezing compartment whenever the
layer of frost on the surface of the evaporator
reaches 3 or 4 mm. When defrosting, remove all
food and set the thermostat at “OFF” position.
Put the drip tray under the evaporator to collect
melted water. After the frost has melted, discard
the melted water and dry up the interior of
refrigerator. The refrigerator can then be
restarted by turning its thermostat to the desired
setting.
2
