2
2.
INSTALLTION
When selec ng a posi on for your unit you should make sure the floor is flat and
firm,
and the
room is well ven lated. Avoid loca ng your unit near a heat sourc
e,
e.g. cooker
,
boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consump on.Extreme cold ambient
temperatures may also cause the unit not to perform properly. This unit is not designedfor use in
a garage or outdoor installa on. Do not drape the unit with any covering.
When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow cold air to circulate
around the unit
and improve
the efficiency of the cooling process.
2.2 Reversing the Door Swing
Phillips style screwdriver /
Flat-blade screwdriver
/ Hexagonal spanner/
Hexagonal socket wrench
1
)
Remove the right top
hinge cover
.
Right top hinge cover
