Note
Make sure that files are stored in the USB and the SD/MS/MMC card before the connection.
USB and SD/MS/MMC Card Function
29
Preparation
5. Press the
CARD
button to shift among disc playback, USB playback and
SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
Note:
1. the screen display will vary from disc to disc.
2. Pull out USB or SD/MS/MMC card directly after the files are played. Then the unit will be in
the state of disc playback again.
00:00
00:00
001/002
BAK
JPEG
6. Press the button to select the folder, and press
ENTER
button to enter.
7. Press the buttons to select the desired track. Then press the
PLAY
button to start
playback.
8. Press the STOP button to stop playback. Press the button to return to the folder menu.
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE button to shift to DVD mode.
4. Insert the USB into the unit's USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the below figure: