Palsonic TFTV806LED, User Manual

Troubleshooting 

No power 

•  Make sure the

 TV and the power cord are connected correctly.

• 

Check if you pressed POWER on the remote control unit. If the indicator in 

   the front panel is red, press POWER in the remote control or the front 

   control panel.

LED TV does not operate

• 

External influences such as lightning or static electricity may cause 

   improper operation. In this case, operate the unit after first turning on 

   the power, or un plugging the AC cord and plugging it in again after 1 

   to 2 minutes.

Power is cut off suddenly

•  Check if the o

ff timer or sleep timer are set.

• 

 The unit’s internal temperature has increased. Remove any objects blocking 

   the vents and clean them to remove dust.

Remote control unit does not operate

•  Check if the batteries are inserted with the polarity (+,-) correctly aligned. 

•  Check if the batteries are discharged. Please replace with new batteries.

•  Make sure that you do not use the remote control under strong or 

   fluorescent  lighting. 

•  Check if there is a fluorescent light  illuminated near the remote control 

sensor. 

• 

 The path of the remote control beam may be blocked; please make sure the 

   path is clear  and that remote control is aimed at the remote control sensor 

   in the TV.   

Picture is cut of

f /with side bar screen 

•  Check if the image position is correct.

•  Check if the screen mode adjustments such as picture size are made  

   correctly.

Strange color, light color, or color misalignment 

• 

Is the room too bright? The picture may look dark in a room that is too bright. 

•  Check the input signal setting.

16