5
Specifications
Commander VHF-144
2 Meter VHF Linear Power Amplifier
•
Frequency Range: 144 to 148 MHz.
•
Modes: USB, LSB, RTTY, FM, CW.
•
Power Requirements: 200/234VAC 50/60 Hz.
•
RF Drive Power: 10 to 15 Watts nominal; 30 Watts maximum, for full 1 KW (CW) output.
•
Grid-trip Current: 70ma
•
RF Output: 1 Kw pep (USB, LSB); 650 Watts cw FM, 450 Watts.
•
Input Impedance: 50 Ohms unbalanced, front panel adjustable.
•
Output Impedance: 50 Ohms nominal.
•
Antenna Load (VSWR): 2:1 maximum.
•
Harmonic Suppression: better than 60db down at rated output.
•
Intermodulation Distortion: better than 35 dB down at rated output.
•
Weight (with transformer): 43 lbs. (19.5 Kg).
•
Cabinet Size: 14.5'' x 14.5'' x 6'' (36.8cm x 36.8 cm x 15.2 cm).
•
Tube Compliment: one 3CPX800A7 ceramic pulse-rated metal triode.
•
Cooling: pressurized chassis forced air, with a die cast bearing blower.
•
Antenna Relay: DPDT; .1 dB insertion loss.
•
Fuse: Type SFE; 234VAC and 200VAC operation: 15 Amp.
•
Female AC plug on a 6’ 12ga 3-wire line cord included
Summary of Contents for COMMANDER VHF-144
