background image

  

  
  
  

1

2

3

4

5

6 7

8

SP30BT Bluetooth 4.0 Speaker 

  
  

1. LED On/Off indicator light 2. TF card input 3. AUX 3.5mm input 4. USB charging

5. Power/Mode 6. Prev/Volume down  7. Play/Pause/FM scanning 8. Next/Volume up

Operation Instructions:

1. 

Power on:

 Press “M” (5.) for 3 seconds. 2. 

Bluetooth:

 The SP30BT will 

automatically connect when the power is turned on or search for Bluetooth

devices. When you see IXB-B06 on your mobile device select that to enable

Bluetooth. If prompted for a password type “0000” to pair the device. Only

one device can be connected at a time. 3. Use the “0” button (7. in the photo

above) to pause and play music in approx. 2 secs. 4. 

Volume adjust:

 Hold down

the “<” (6. above) or “>” (8. above) buttons to adjust volume. 

 

5. 

Next/Prev:

 Tap the “<” (6. above) or “>” (8. above) buttons to select

tracks on your device. 6. 

TF Card:

 Insert TF card into slot to play MP3 files. 

7. 

FM:

 Press “M” (5. above) to switch mode. Then hold the “O” button

(7. above) to auto scan for FM stations. 8. 

Mode switch:

 Tap the mode

switch “M” button (5. above) to switch modes of the SP30BT. The mode

sequence is BLUETOOTH MODE>TF CARD>FM MODE>AUX MODE.

9. 

Recharging:

 When the battery charge is low, the speaker will remind

you to recharge the speaker. When charging the red light is on. Please

use the provided USB cable and USB recarging devices only to recharge

the SP30BT. When you use the speaker for the first time please recharge

it after full discharge. The first three charges will extend the battery life

up to 8 hours.

Note:

1. The SP30BT is an anti-interference product, but very strong high 

frequency microwave and magnetic fields will still interfere with the

product. Please don’t use in such conditions.

2. Bluetooth is a two-way transmission, different users’ terminals have

different transmission ranges. Please use standard Bluetooth devices.

3. Some phones do not have a fade-in/fade-out function, which may

cause a POP sound when paused.

4. The modes are isolated from each other . The SP30BT cannot work

in two different modes at the same time.

5. If the speaker will be placed away for a long time, please recharge it

once a month to maintain the battery capacity.

Reviews: