PAM SS-TM-IPC-700 Brief Instructions Download

Page: 1 / 3

Website: www.seestation.com

Email: sales@seestation.com

Tel: 918-872-1524

Address 11413 E 58

Street (Suite B) Tulsa, Ok 74055

Brief instructions for the SS-TM-IPC-700 blue cable tester (Wire tracing tone probe)

(1)

Connect LAN cable or telephone cable to SS-TM-IPC-700A's UTP port and the blue cable tester's UTP port,

and then the connecting status, cable type and the sequence of wires as well as the serial number of the cable tester

kit will be displayed on SS-TM-IPC-700A.

(2)

Connect the PoE switch to the blue cable tester’s PD port, if the PoE switch supply power via the pin 1236, the

green indicator will be on, if the PoE switch supply power via the pin 4578, the yellow indicator will be on, if

supply power via 1236 4578, the two indicators will both be on.

Summary of Contents for SS-TM-IPC-700

Page 1: ...d the blue cable tester s UTP port and then the connecting status cable type and the sequence of wires as well as the serial number of the cable tester kit will be displayed on SS TM IPC 700A 2 Connec...

Page 2: ...k icon to enter click the Number on the screen to adjust audiotype Press the blue cable tester s on off button to turn on the blue cable tester then use its copper pointer to touch all the cables in t...

Page 3: ...d to SS TM IPC 700A Application it s convenient for people to find out the other end of the cable from the messy cables in security maintenance and network engineering While searching BNC cable connec...