NOTES:
When the multipoint feature is being used, the device
cannot support 3 way calling feature.
11
Low Voltage Protection of Battery
When the voltage of the battery has decreased to 3.3V, the red LED
light will flash every three seconds, and the PNG125 will power OFF
automatically when the voltage drops to 3.0V.
12
Restore to Default Setting
Please follow the steps below to reset the PNG125 to its original
settings and remove all the previous pairing and connections.
(1) Ensure the PNG125 is in standby mode.
(2)
Press and hold both “V+” and “V-” buttons simultaneously for
10 seconds until the blue and red LED lights flash 5 times,
then the PNG125 will resume standby mode. The PNG125 is
now back to its original settings, and after powering ON, the
PNG125 will enter pairing mode automatically.
