1. On / Off
Switches on or off the heater or stands it by.
2. P1
After turn on the heater, you can choose low heating.
3. P2
After turn on the heater, you can choose moderate heating.
4. P3
After turn on the heater, you can choose high heating.
5. Time
Adjust the timer function.
Warning!
Insert the batteries of your remote control.
Notice:
1- Replace the old batteries with the same type batteries. Otherwise, your heater may
not function well.
2- Pull out the batteries in case of long terms of disuse to prevent leakage which may
impair your remote control.
7.2 Operation of the Remote Control
1. Turn on the power, the buzzer on the products will beep once, the digital screen and the
indicator is no show. At this time, press On / Off button to make it in stand by mode.
2. Press the function button to choose the power level. P1 indicator appears on the screen,
and the indicator flashes three times, indicating that the appliance is in low-grade mode.
Press the function button again to mid-grade, the buzzer will beep once, P2 indicator
appears on the screen, and the indicator flashes three times, indicating that the appliance
is in mid-grade mode. Press the function button again to high-grade, the beeper will beep
once, P3 indicator appears on the screen, and the indicator flashes three times, indicating
that the appliance is in high-grade mode. Press the function button again, you can choose
low, medium and high gear. Press ON / OFF button on the remote control or the heater
itself to switch off the heater.
3. In stand-by mode, press the timer button, the appliance can set time from 1 to 24 hours.
After set the time, the indicator next to the digital tube will light up, it means that the
appliance has been selected timer function. "0" indicates time not set.
4. When the appliance is on working, the digital screen always shows the power state
(P1-P2-P3). The timer setting, when the indicator lights up, it means that the machine has
been set a timer function from 1 to 24 hours. To view the regular time, press the timer
button, the appearing time is the present setting time, at this time the indicator also flashes
three times continuously, indicating that the appliance enters into the timer setting state.
