background image

electric shock, or injury to persons. The use of attachments
not recommend or sold by unauthorized dealers may cause
hazards.

18. Always plug heaters directly into a wall outlet/receptacle.

Never use with an extension cord or relocatable power tap
(outlet/power strip).

19. Avoid use of an extension cord as the extension cord may

overheat and cause a risk of fire. However, if you have to
use an extension cord, the cord shall be in compliance with
the No.14 AWG minimum size and rated no less than
1875W.

20. CAUTION: Mount with bottom of heater at least 240cm from

floor, 25cm from the side wall, 50cm from ceiling.

21. This unit is designed for a 120V AC electrical outlet

connection ONLY.

22. DO NOT attempt to repair or adjust any electrical or

mechanical functions on this unit, doing so will void your
warranty, The inside of the unit contains no user serviceable
parts. Only qualified personnel should perform all servicing
only.

23. Connect to properly grounded outlets only.
24. Children should be supervised to ensure that they do not

play with the appliance.

SAVE THESE INSTRUCTIONS

Warning

These appliances must be earthed.

Before installing or replacing the bulb, the appliance must be

always being disconnected from the 120V supply.

The appliance must be disconnected from the 120V supply

before the lid is opened.

The appliance must be installed exclusively in perfect

horizontal position.

Installation

Heater ZHQ 1580-WM-RM is built with the best quality

components in accordance to the prevailing legal regulations

and certified for safety in use. For best results from the

appliance please ensure that the installation is done by a

qualified electrician in accordance with the following instructions

and taking full account of current regulations. When using the

heater, please carefully follow the instructions and

recommendations below.

You could loosen the two M6*10 screws to change the best

Angle of heating. Then retighten them.

Summary of Contents for ZHQ1580-WM-RM








Reviews: