© Pan Acoustics GmbH
Page 4 of 14
Assembly Manual
1. Introduction
Thank you for choosing a product from Pan Acoustics.
With the purchase of this accessory for Pan Acoustics loudspeaker systems, you have acquired a
product for the safe mounting of P / PB xx loudspeakers on displays.
Please read this assembly manual carefully prior to use in order to guarantee fault-free operation.
This symbol provides important instructions for the proper handling of the
product. Failure to observe this instruction may result in damage to the
product or malfunctions.
1.1. Symbols and explanation
This symbol indicates a hazard with a high level of risk. If this hazard is not
avoided, serious injury or death may result.
This symbol indicates a hazard with a medium level of risk. If this hazard is
not avoided, moderate to serious injury or death may result.
This symbol indicates a hazard with a low level of risk. Failure to observe this
instruction may result in minor injuries or damage to property.
All information in this assembly manual is based on the product properties available at the time of
preparation and the safety regulations applicable at that time.
This assembly manual describes the design, function and assembly of the “VESA VSM Loudspeaker
Mount” and the “VESA VSM XL Loudspeaker Mount”. It is aimed at system technicians and persons
assigned the task of installing and operating a relevant system.
Pan Acoustics reserves the right to make changes and modifi cations within the scope of legal regu-
lations and product improvements without prior notice.
This assembly manual and all additional information required for operation must be read prior to
use by all persons involved in commissioning. The assembly manual and all additional information
required must be kept within reach near the device.
All necessary information and documents can be obtained from the Pan Acoustics website,
https://www.pan-acoustics.de/en/service/download
, or by sending an e-mail to
contact@pan-acoustics.de
.
1.2. General information and target group
2. Product description
The “VESA VSM Loudspeaker Mount” and the “VESA VSM XL Loudspeaker Mount” permit to mount
two P / PB xx loudspeakers from the Pan Beam, Pan Speaker, Pan EVAC, Pan 2-Line and Pan AMT
product series on displays. The mount is designed to hold loudspeakers with a maximum weight of
8 kg.
The mount has slotted holes that permit the exact horizontal and vertical positioning of the loud-
speakers to be mounted.
The mount is mounted on the display by means of screw connections together with the correspond-
ing VESA monitor mount (not included in the scope of delivery). For the necessary screw connections
between the display, VSM / VSM XL loudspeaker mount and VESA monitor mount, the assembly kit
includes various screws.
The mount is designed for indoor use.
NOTICE
CAUTION
WARNING
DANGER
