© Pan Acoustics GmbH
Page 5 of 14
Assembly Manual
2.1. Scope of delivery VSM (55’’-65’’)
Description
Quantity
VSM, bracket H, powder-coated, RAL 9005
4
VSM, bracket V, powder-coated, RAL 9005
2
VSM / VSM XL, assembly kit (content see 2.3)
1
2.2. Scope of delivery VSM XL (75’’-98’’)
Description
Quantity
VSM XL, bracket H, powder-coated, RAL 9005
4
VSM XL, bracket V, powder-coated, RAL 9005
2
VSM / VSM XL, assembly kit (content see 2.3)
1
Description
Quantity
Flange head bolt M6 x 10 mm, hexagon socket, pressed-on washer
8
Flange head bolt M6 x 30 mm, hexagon socket, pressed-on washer
4
*
Flange head bolt M6 x 35 mm, hexagon socket, pressed-on washer
4
*
Flange head bolt M6 x 40 mm, hexagon socket, pressed-on washer
4
*
Flange head bolt M8 x 30 mm, hexagon socket, pressed-on washer
4
*
Flange head bolt M8 x 35 mm, hexagon socket, pressed-on washer
4
*
Flange head bolt M8 x 40 mm, hexagon socket, pressed-on washer
4
*
Cup square bolt, M6 x 16 mm
4
Set screw M6 x 8 mm, hexagon socket
4
Slot nut 30 x 4 x 90 [mm]
4
Hex nut M6, polyamide clamping part
4
Washer M6, large outer diameter
4
Spacer
4
Cellular rubber band, black, self-adhesive
2.7 m
2.3. Scope of delivery VSM / VSM XL, assembly kit
The loudspeakers to be mounted are not included in the scope of delivery. These must be purchased
separately.
Upon receipt, the mount must be carefully checked for transport damage and completeness. In
case of damage, the forwarder and sender are to be notifi ed without delay.
Safety may be compromised if the product:
•
shows signs of visible damage.
•
has not been delivered completely.
•
has been stored under adverse conditions for a prolonged period of time.
•
has been improperly shipped (e.g. unsuitable packaging).
If the product shows signs of impairments that no longer guarantee safe operation, the article is to
be secured and marked accordingly. It must also be ensured that no intended or inadvertent use by
third parties is possible.
NOTICE
The screws included in the assembly kit marked with * must be used to mount the VESA monitor
mount with the VESA VSM / VSM XL loudspeaker mount on the display. If these screws cannot be
used due to their length and shape, they must be replaced by suitable screws by the person assem-
bling the system.
NOTICE
