background image

.    The 

must   be   placed   inside   at   intervals   of 

                                                                                                              

Mod.

 

                                                                              SIERRA   

 

 

   

45 minutes

logs should be positioned horizontally and separate from one another, 
to assure a correct combustion. In any instance a charge of fuel must not 
be added to the stove until the previous charge has been burnt, leaving 
only  a  basic  fire  bed  which  is  enough  to  light  the  next  charge  but  no 
stronger. 
     To achieve a slow combustion you should regulate the fire with the 
air  draughts,  which  must  be  kept  permanently  unblocked  to  allow  the 
combustion air to be distributed. 
     It is normal for the seal of the glass door panel to melt with use. Even 
though  the  stove  can  function  without  this  seal,  it  is  recommended  that 
you replace it seasonally. 
     The  lower  can  be  removed  in  order  to  clear  out  ash.  Empty  it 
regularly  without  waiting  for  it  to  fill  up  too  much,  to  avoid  the  grill 
becoming damaged. Take care with the ash which may still be hot up to 
24 hours after the stove has been used. 
     Do  not  open  the  door  abruptly  in  order  to  avoid  smoke  being 
released,  and  never  open  it  without  opening  the  air  draught 
beforehand. Open the door only in order to put in the appropriate fuel. 
     The glass, and stove in  general may reach very high temperatures. 
Do not expose yourself to risks of burns. When handling metal pieces, 
use the glove provided with the stove. 
     In  case  of  the  stove  becoming  too  hot,  close  the  air  draughts  to 
reduce the intensity of the fire. 
     In case of malfunction, contact us the manufacturers. 
 
Maintenance 
 
     It  is  advisable  to  clean  the  glass  door  panel  periodically  to  avoid 
blackening  by  soot  deposits.  Professional  cleaning  products  are 
available for this. Never use water. 
 
     Never clean the stove while it is in use. 
 

  

9

Summary of Contents for SIERRA

















Reviews: