background image

POWER

TEST

MAX

®

 Home Cinema UPS

Pure Sine Wave
Intelligent Critical Load Control

UNSAFE VOLTAGE

LINE FAULT

POWER ON

AVR MODE

BATTERY MODE

BATTERY LEVEL

LOAD LEVEL

MODEL # M1500-UPS

This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries.
Please read and follow all instructions carefully during installation and operation of the unit.  Read this manual thoroughly before
attempting to unpack, install, or operate.

CAUTION! 

The UPS must be connected to an AC power outlet

with fuse or circuit breaker protection.

DO NOT

plug the machine into an outlet that is not grounded.  

If you need to de-energize this equipment, turn off and unplug
the UPS.

CAUTION!  DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIP-
MENT! 

Panamax does not sell products for life support or med-

ical applications.  

DO NOT

use in any circumstance that would

affect operation or safety of any life support equipment, with any
medical applications, or patient care.

CAUTION! 

The battery can energize hazardous live parts inside

even when the AC input power is disconnected.

CAUTION! 

To prevent the risk of fire or electric shock install in a

temperature and humidity controlled indoor area, free of conduc-
tive contaminants.  (Please see specifications for acceptable 
temperature and humidity range).

CAUTION!

To reduce the risk of electric shock, do not remove

the cover, except to service the battery. No user serviceable parts
inside, except for the battery.

CAUTION! 

To avoid electrical shock, turn off the unit and unplug

it from the AC power source before servicing the battery or
installing a component.

CAUTION!   DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce

the risk of fire, do not use with or near aquariums. Condensation
from the aquarium can come in contact with metal current con-
tacts and cause the machine to short out.

1

USA & Canada (800) 472-5555  •  (707) 283-5900  •  Fax (707) 283-5901

Important Safety Instructions

CAUTION! T

he 2 silver handles on the battery

access panel are for removing the panel only. 

NOT FOR LIFTING PRODUCT.

Summary of Contents for M1500-UPS





















Reviews: