DigitalFlow™ XGF868i Startup Guide
47
Chapter 4. Operation
4.5.3 PanaView Display
Power up PanaView, establish communications with the XGF868i and enter the
required startup parameters
, as
described in Chapter 2,
Initial Setup
. Then, proceed as follows:
Note:
See Chapter 2,
Initial Setup
, in this manual and/or Chapter 1,
Programming Site Data
, in the
Programming
Manual
for complete instructions on entering startup data via PanaView.
1.
In PanaView, pull down the
Output
menu, as shown in Figure 14 below, and click on the
Text Display
option.
Figure 14: The Output Menu
Note:
The
Text Display
window that appears after Step 1 is actually stacked on top of any previously opened
windows (such as the
Meter Browser
window).
2.
Using the
Window
menu, as described in the
PanaView User’s Manual,
arrange the open windows in the desired
below shows the
Text Display
window in its maximized (full-screen) size.
Figure 15: The Text Display Window
3.
The left pane of the
Text Display
window contains the standard PanaView network tree. Expand the XGM branch,
and double-click on the desired channel. (On 2-channel units, you can also display the SUM, DIFF or AVG
parameters.)
Summary of Contents for DigitalFlow XGF868i
