2.
Click the [Start] button of “Mask area”.
→
Borders will appear and the image displayed on the [Image quality] tab will be divided into 48 (6x8)
SW355
SW352
SF346
SF342
SF335
SW316L
SW316
SW314
SP306
SP305
SP302
SW155
SW152
SF135
SP105
NP502
/ 16 (4x4)
SF132
SP102
.
Note
SW355
SW352
SF346
SF342
SF335
SW316L
SW316
SW314
SP306
SP305
SP302
SW155
SW152
SF135
NP502
:
•
When “16:9” is selected for “Aspect ratio”, images are divided into 32 (4x8).
SF132
SP105
SP102
:
•
“Mask area” can be set only when “4:3” is selected for “Aspect ratio”. If the “Aspect ratio” is changed
to “16:9” after setting the mask area, the setting of the mask area is maintained.
3.
Click the divided areas to be masked.
→
The clicked areas will be masked and will become white. To cancel masking, click the area again.
4.
Click the [End] button after completing masking areas.
→
The borders on the image displayed on the [Image quality] tab will disappear.
IMPORTANT
SW355
SW352
SF346
SF342
SF335
SW316L
SW316
SW314
SP306
SP305
SP302
SW155
SW152
SF135
NP502
:
118
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]