C
Making/Answering Calls
19
Using the handset
1
Lift the handset and press
{C}
or
{s}
when the unit rings.
L
The called line is automatically
selected. To change the line
selection mode, see page 15.
L
You can also answer the call by
pressing
P
or
Q
.
L
You can also answer the call by
pressing any dial key from
{
0
}
to
{
9
}
,
{*}
, or
{
#
}
.
(Any key
answer feature)
2
When finished talking, press
{ih}
or place the handset on the base
unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not
need to press
{C}
. To turn this feature
on, see page 25.
Adjusting the ringer volume when
receiving a call
Press
{^}
or
{V}
.
Using the base unit
1
{
SP-PHONE
}
L
The called line is automatically
selected. To change the line
selection mode, see page 15.
L
You can also answer the call by
pressing
{
LINE 1
}
or
{
LINE 2
}
.
2
When finished talking, press
{
SP-PHONE
}
.
Adjusting the ringer volume when
receiving a call
Press
{^}
or
{V}
.
L
To turn the ringer volume off, press
and hold
{V}
until the beep sounds.
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1
Press
{
HOLD
}
during an outside
call.
2
Press
{
HOLD
}
again.
L
To release the hold, press
P
or
Q
that is flashing on the
handset.
Press
{
HOLD
}
during an outside call.
L
To release the hold, press
{
LINE 1
}
or
{
LINE 2
}
that is flashing on the base
unit.
Note:
L
For handset and base unit:
– If a call is kept on hold for more than
9 minutes, an alarm tone starts to
sound. After 1 additional minutes on
hold, the call is disconnected.
Mute
While mute is turned on, you will be able
to hear the other party, but the other
party will not be able to hear you.
To mute your voice, press
{
C/
T
}
.
L
To return to the conversation, press
{
C/
T
}
again.
Handset
Base unit
Handset
TG8280FX(e).book Page 19 Tuesday, September 11, 2007 1:52 PM
