Wall mounting
The base unit can be mounted on a wall by
changing the wall mounting adaptor’s position.
Note:
R
Make sure that the wall and the fixing method
are strong enough to support the weight of the
unit.
Base unit
1
To remove the wall mounting adaptor, push
down the release levers (
A
). Remove the
adaptor (
B
).
A
B
B
B
B
A
2
A
Turn the adaptor so that the words “UP
WALL” are facing up.
B
Tuck the telephone line cord inside the wall
mounting adaptor.
C
Connect the AC adaptor cord and
telephone line cord.
2
3
1
3
Insert the lower tabs of the adaptor into the
unit’s bottom slots (
A
), then insert by pushing
down the levers of the adaptor into the upper
slots (
B
).
R
The words “UP WALL” should be facing up.
A
A
B
B
4
Mount the unit on a wall then slide down to
secure in place.
R
This product is compliant with the following
wall phone plate sizes (2 types).
1
83 mm (3
1
/
4
inches)
2
102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs for
(
3
) and (
4
) respectively.
3
4
1
2
3
4
Charger
Drive the screws (
1
) (not supplied) into the wall.
2
27.2 mm (1
1
/
16
inches)
1
2
70
For assistance, please visit http://www.panasonic.com/help
Useful Information
TG958x_0704_ver031.pdf 70
2014/07/04 10:32:29
