Making cellular calls
Available for:
KX-TGE670 series (page 4)
Important:
R
The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R
Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R
Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
1
Press
M
CELL 1
N
or
M
CELL 2
N
.
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press
MZN
.
Note:
R
While on a call, you can switch from the
base unit to the handset:
– With the call sharing mode on
(page 52), press
M
CELL
N
on the
handset.
a
MbN
: Select the desired
cellular phone.
a
M
SELECT
N
a
Press
MZN
on the base unit.
– If the handset is on the base unit, simply
lift it.
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 22).
Adjusting the speaker volume
Press
MjN
or
MkN
repeatedly while talking.
Note:
R
The speaker volume you set is kept for
each line (landline and cellular lines).
Redialing the last number dialed
1
Press
M
CELL 1
N
or
M
CELL 2
N
.
2
M
REDIAL
N
Making landline calls
1
MZN
2
Dial the phone number.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press
MZN
.
Note:
R
While on a call, you can switch from the
base unit to the handset:
– Press
M
N
on the handset, then press
MZN
on the base unit with the call
sharing mode on (page 52).
– If the handset is on the base unit, simply
lift it.
Redialing the last number dialed
MZN
a
M
REDIAL
N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 43).
Example:
If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
MZN
2
9
a
M
PAUSE
N
3
Dial the phone number.
Note:
R
A 3.5 second pause is inserted each time
M
PAUSE
N
is pressed.
Answering calls
When a landline call is being received, the
SP-PHONE indicator flashes rapidly.
30
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
