When a cellular call is being received, the
CELL indicator and SP-PHONE indicator flash
rapidly.
1
Press
MZN
when the unit rings.
R
You can also answer the cellular call
by pressing
M
CELL 1
N
or
M
CELL 2
N
.
2
Speak into the microphone.
3
When you finish talking, press
MZN
.
Adjusting the base unit ringer volume
n
While the base unit is ringing for an
incoming call:
Press
MjN
or
MkN
repeatedly to select the
desired volume.
n
While the base unit is in standby mode:
Press
MjN
or
MkN
repeatedly to select the
desired volume for landline call.
R
To turn the ringer off, press and hold
MkN
until the unit beeps.
Note:
R
You can adjust the ringer volume for
cellular call and landline call by
programming (page 47, 49).
R
The ringer volume you set is kept for each
line (landline and cellular lines).
Useful features during a
call
Hold
1
Press
M
HOLD
N
during an outside call.
2
To release hold on the cellular line:
Press
M
CELL 1
N
or
M
CELL 2
N
.
R
A handset user can take the call:
M
CELL
a
MbN
: Select the
corresponding cellular phone.
a
M
SELECT
N
*1 The call is taken in the following
situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 22).
To release hold on the landline:
Press
MZN
.
R
A handset user can take the call by
pressing
M
N
.
Note:
R
While a landline call is on hold, the
SP-PHONE indicator flashes.
R
After holding for 10 minutes, the call is
disconnected.
Mute
1
Press
M
MUTE
N
during a call.
R
The SP-PHONE indicator flashes.
2
To return to the call, press
M
MUTE
N
.
Flash for landline calls
M
FLASH
N
allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R
To change the flash time, see page 52.
For call waiting service users
To use call waiting, you must first subscribe
with your phone service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
1
Press
M
CALL WAIT
N
to answer the 2nd
call.
2
To switch between calls, press
M
CALL
WAIT
N
.
Note:
R
Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press
*
before entering access numbers
which require tone dialing.
For assistance, please visit http://shop.panasonic.com/support
31
Making/Answering Calls Using the Base Unit
