Panasonic AFPXHEAD4, User Manual

6;6<

Order Placement Recommendations and Considerations

The Products and Specifications listed in this document are subject to change (including  

specifications, manufacturing facility and discontinuing the Products) as occasioned by the 

improvements of Products. Consequently, when you place orders for these Products, Panasonic 

Industrial Devices SUNX asks you to contact one of our customer service representatives and 

check that the details listed in the document are commensurate with the most up-to-date  

information. 

[Safety precautions] 

Panasonic Industrial Devices SUNX is consistently striving to improve quality and reliability. 

However, the fact remains that electrical components and devices generally cause failures  

at a given statistical probability. Furthermore, their durability varies with use environments  

or use conditions. In this respect, check for actual electrical components and devices under  

actual conditions before use. Continued usage in a state of degraded condition may cause the  

deteriorated insulation. Thus, it may result in abnormal heat, smoke or fire. Carry out safety  

design and periodic maintenance including redundancy design, design for fire spread prevention, 

and design for malfunction prevention so that no accidents resulting in injury or death, fire  

accidents, or social damage will be caused as a result of failure of the Products or ending  

life of the Products. 

The Products are designed and manufactured for the industrial indoor environment use. Make

sure standards, laws and regulations in case the Products are incorporated to machinery, system,

apparatus, and so forth. With regard to the mentioned above, confirm the conformity of the

Products by yourself.

Do not use the Products for the application which breakdown or malfunction of Products may 

cause damage

to the body or property.

i) usage intended to protect the body and ensure security of life
ii)application which the performance degradation or quality problems, such as breakdown,

of the Products

may directly result in damage to the body or property

It is not allowed the use of Products by incorporating into machinery and systems indicated

below because

the conformity, performance, and quality of Products are not guaranteed under

such usage.

i) transport machinery (cars, trains, boats and ships, etc.)
ii) control equipment for transportation
iii) disaster-prevention equipment / security equipment
iv) control equipment for electric power generation
v) nuclear control system
vi) aircraft equipment, aerospace equipment, and submarine repeater
vii) burning appliances
viii) military devices
ix) medical devices

ق

except for general controls

ك

x) machinery and systems which especially require the high level of reliability and safety

[Acceptance inspection] 

In connection with the Products you have purchased from us or with the Products delivered  

to your premises, please perform an acceptance inspection with all due speed and, in connection 
with the handling of our Products both before and during the acceptance inspection, please  
give full consideration to the control and preservation of our Products. 

[Warranty period] 

Unless otherwise stipulated by both parties, the warranty period of our Products is

 3 years

after the purchase by you or after their delivery to the location specified by you. 
The consumable items such as battery, relay, filter and other supplemental materials are excluded 
from the warranty. 

[Scope of warranty] 

In the event that Panasonic Industrial Devices SUNX confirms any failures or defects of  

the Products by reasons solely attributable to Panasonic Industrial Devices SUNX during the  
warranty period, Panasonic Industrial Devices SUNX shall supply the replacements of the Products, 
parts or replace and/or repair the defective portion by free of charge at the location where  
the Products were purchased or delivered to your premises as soon as possible. 

However, the following failures and defects are not covered by warranty and we are not responsible 

for such failures and defects.  

(1) When the failure or defect was caused by a specification, standard, handling method,

etc. which was specified by you. 

(2) When the failure or defect was caused after purchase or delivery to your premises by

an alteration in construction, performance, specification, etc. which did not involve
us.

(3) When the failure or defect was caused by a phenomenon that could not be predicted by

the technology at purchasing or contracted time.

(4) When the use of our Products deviated from the scope of the conditions and environment

set forth in the instruction manual and specifications.

(5) When, after our Products were incorporated into your products or equipment for use, damage

resulted which could have been avoided if your products or equipment had been equipped
with the functions, construction, etc. the provision of which is accepted practice in
the industry.

(6) When the failure or defect was caused by a natural disaster or other force majeure.

(7) When the equipment is damaged due to corrosion caused by corrosive gases etc. in the

surroundings.

The above terms and conditions shall not cover any induced damages by the failure or defects 

of the Products, 

and not cover your production items which are produced or fabricated by using

the Products. In any case, our responsibility for compensation is limited to the amount paid 
for the Products. 

[Scope of service] 

The cost of delivered Products does not include the cost of dispatching an engineer, etc. 

In case any such service is needed, contact our sales representative. 

3DQDVRQLF,QGXVWULDO'HYLFHV ㄟㄡㄚㄤ &R/WG

WUME-FPXHAIO-01