10
Camera Extension System and Camera Recorder
Configuration Example
Connection with the AG-HPX300/301/302/304
* VIDEO signal will be converted to component signal.
z
Use BT-LH80W/WU as a monitor.
z
When the video format of the AG-HPX300/301/302/304 is
HD format, the RET signal selection switch on the unit
does not work and the RET VIDEO signal is output
constantly from the RET OUT connector of the camera
adapter. The RET SDI signal is not output.
z
When the video format of the AG-HPX300/301/302/304 is
SD format, the RET signal is selected to be the RET SDI
signal or the RET VIDEO signal. The selection is made
using the RET signal selection switch on the unit.
Also, the RET signal output from the VF OUT connector of
the camera adapter is the signal selected on this unit.
z
Video recording on the AG-HPX300/301/302/304 is sent
to camera adapter via the REMOTE cable of the
AG-HPX300/301/302/304, and the VIDEO signal
(composite signal) is converted to component signal by
the camera adapter.
z
Video signal selected by the RET switch of the camera
adapter is output from the VF OUT connector of the
camera adapter. RET signal is output when the RET
switch is pushed, and the signal from the AG-HPX300/
301/302/304 is output when the switch is not pushed.
z
If it is not necessary to display the camera status signal
while displaying the video being recorded by the
AG-HPX300/301/302/304 on the BT-LH80W/WU, it is
possible to change the video being recorded to SDI signal
by supplying SDI2 output or SDI1 output of the
AG-HPX300/301/302/304 to the BT-LH80W/WU, and
selecting the INPUT SEL.SDI in the GPI4 item of the
BT-LH80W/WU.
z
The camera extension system including this unit can send
back 2 lines of signals, RET SDI signal and RET VIDEO
signal of this unit, to the camera adapter simultaneously,
when the video format of the AG-HPX300/301/302/304 is
HD format. The RET VIDEO signal sent back to the
camera adapter will be output from the RET OUT
connector, so it can be used as a prompter signal or on-air
monitor signal.
z
When the VIDEO signal is selected by the RET signal
selection switch of this unit, RET VIDEO signal will be the
only return signal from this unit to the camera adapter. The
VF OUT connector of the camera adapter outputs an SD
component signal resulting from the conversion of the
RET VIDEO signal (composite). The RET OUT connector
of the camera adapter outputs the RET VIDEO signal
(composite).
z
If the video format of theAG-HPX300/301/302/304 is SD,
only 1 line of either RET SDI signal or RET VIDEO will be
the return signal from this unit. The video signal output
from the RET OUT connector of the camera adapter is the
result of converting the RET signal selected using the RET
signal selection switch to a composite signal.
REMOTE
VIDEO IN
REMOTE
VF OUT
CA
OUT
BS IN
CA IN
BS
OUT
SDI OUT1
SDI OUT2
GPI
YP
B
P
R
SDI IN
SDI OUT2
SDI OUT1
GENLOCK
IN
SDI IN
GENLOCK
OUT
RET OUT
RET SDI
RET
VIDEO
AG-HPX300/
301/302/304
RET
switch
BT-LH80W/WU
Decoder *
AG-CA300G
AG-BS300P/E
Prompter
Separation
Multiplex
(signal B)
(signal A)
(signal B)
AG-BS300P_E(VQT2H41)_E.book 10 ページ ２００９年１０月２３日 金曜日 午後６時８分
