11
Camera Extension System and Camera Recorder Configuration Example
(continued)
Connection with camera recorders other than AG-HPX300/301/302/304 or AG-HPX500/502
*1 VIDEO signal will be converted to component signal.
*2 Use the BT-CS80G.
z
Use BT-LH80W/WU as a monitor.
z
When the video format of the camera recorder is HD
format, the RET signal selection switch on the unit does
not work, and the RET OUT connector of the camera
adapter outputs the RET VIDEO signal as normal. The
RET SDI signal is not output.
z
When using the AJ-HPX2000/2100 or AJ-HPX3000G, use
the unit menu to set the CAMERA VF item and the CRT
VF item for the AJ-HPX2000/2100 or AJ-HPX3000G to
match the type of viewfinder selected in the menu settings
of the camera recorder.
z
When SD format has been set on a camera recorder
which allows SD format as a video format (AJ-HPX2000/
2100, AJ-HPX3000G), the RET signal is selected to be a
RET SDI signal or a RET VIDEO signal. Selection of the
signal is performed by the RET signal switching switch on
this unit.
Also, the RET signal output from the VF OUT connector of
the camera adapter is the signal selected on this unit.
z
Signal output from the VF connector of the camera
recorder for the video being recorded by the camera
recorder is supplied to the VF connector of the
BT-LH80W/WU via the VF cable (BT-CS80G; optional).
z
When the GPI4 item of the BT-LH80W/WU is set to INPUT
SEL.VF, video signal selected by the RET switch of the
camera adapter is output from the VF OUT connector of
the camera adapter. When the RET switch is being
pushed, the RET signal is output. When not being pushed,
the signal from the VF OUT connector of the camera
recorder is output.
z
If it is not necessary to display the camera status signal
while displaying the video being recorded by the camera
recorder on the BT-LH80W/WU, it is possible to change
the video being recorded to SDI signal by supplying SDI2
output or SDI1 output of the camera recorder to the
BT-LH80W/WU, and selecting the INPUT SEL.SDI in the
GPI4 item of the BT-LH80W/WU.
z
The camera extension system including this unit can send
back 2 lines of signals, RET SDI signal and RET VIDEO
signal of this unit, to the camera adapter simultaneously,
when the video format of the camera recorder is HD
format. The RET VIDEO signal sent back to the camera
adapter will be output from the RET OUT connector, so it
can be used as a prompter signal or on-air monitor signal.
z
When the VIDEO signal is selected by the RET signal
selection switch of this unit, RET VIDEO signal will be the
only return signal from this unit to the camera adapter. The
VF OUT connector of the camera adapter outputs an SD
component signal resulting from the conversion of the
RET VIDEO signal (composite). The RET OUT connector
of the camera adapter outputs the RET VIDEO signal
(composite).
z
When SD format has been set on a camera recorder
which allows SD format as a video format (AJ-HPX2000/
2100, AJ-HPX3000G), the RET signal from the unit is
selected to be either an SDI signal or a RET VIDEO
signal. The video signal output from the RET OUT
connector of the camera adapter is a composite signal
resulting from the conversion of the RET signal selection
switch using the RET signal selection switch.
REMOTE
VIDEO IN
REMOTE
VF OUT
CA
OUT
BS IN
CA IN
BS
OUT
SDI OUT1
SDI OUT2
GPI
YP
B
P
R
VF
VF
SDI1
GENLOCK
IN
SDI IN
GENLOCK
OUT
RET OUT
RET SDI
RET
VIDEO
Camera
recorder
RET
switch
BT-LH80W/WU
AG-CA300G
AG-BS300P/E
VF cable *
2
Decoder *
1
Prompter
(signal B)
(signal A)
(signal B)
Separation
Multiplex
AG-BS300P_E(VQT2H41)_E.book 11 ページ ２００９年１０月２３日 金曜日 午後６時８分
