7
Table of Contents
Read this first ! ........................................................2
Supplied Accessories.............................................7
Features ...................................................................7
System Configuration Diagram .............................8
Precautions When Connecting the System..........9
Camera Extension System and
Camera Recorder Configuration Example..........10
Connection with the AG-HPX300/301/302/304 ........... 10
Connection with camera recorders other than
AG-HPX300/301/302/304 or AG-HPX500/502 ............11
Connection with the AG-HPX500/502 ......................... 12
Part Names and Functions...................................13
Front Panel.................................................................. 13
Rear Panel .................................................................. 14
About the Signals to Input to GENLOCK IN
Connector.............................................................. 16
About the RET Signal ........................................... 16
About the Rack Mount.......................................... 17
Setting up the camera recorder........................... 17
About the Power Supply Cable ........................... 18
Menu Display......................................................... 19
List of Menus......................................................... 20
Connector Signals ................................................22
Specifications ....................................................... 23
Supplied Accessories
AC cable (AG-BS300P)
a
1
AC cables (AG-BS300E)
a
2
Rack Mount Adapters
a
2
Rack Mount Adapter Screws
a
6
Features
This unit has the following features:
z
The unit is connected to the camera adapter
(AG-CA300G; optional) by a power cable (refer to page 18
for specification) and two BNC cables, and works to
supply power to the camera recorder side and transmit the
video and audio signals recorded using the camera
recorder.
z
It is possible to transfer one line of the return video (RET).
(2 lines of transfer are possible depending on the mode.)
z
It is possible to transfer one line of the intercom (INCOM).
z
It is possible to transfer the remote control signal.
z
The transmission between this unit and the camera
adapter uses a non-compressed digital signal, so
transmission without any degradation of the video and
audio signals is possible.
z
It is possible to extend the length of the cable between this
unit and the camera adapter up to 100 m. (When using
BNC cable: 5C-FW)
z
DC operation is possible. (However, power supply to the
camera adapter is not possible.)
z
The unit is compatible with multi-format.
AG-BS300P_E(VQT2H41)_E.book 7 ページ ２００９年１０月２３日 金曜日 午後６時８分
