12
Camera Extension System and Camera Recorder Configuration Example
(continued)
Connection with the AG-HPX500/502
* VIDEO signal will be converted to component signal.
z
Use the viewfinder included with the AG-HPX500/502
(dedicated for SD). Also, it is required to use the AG-
YA500G (optional).
z
Use the RET VIDEO signal as the RET signal. Selection of
the signal is performed by the RET signal switching switch
on this unit.
Also, the RET signal output from the VF OUT connector of
the camera adapter is the signal in SD format selected by
this unit. When using a viewfinder, input the SD format
signal into the RET IN SDI connector and RET IN VIDEO
connector of the unit.
z
Video being recorded by the AG-HPX500/502 is supplied
to the AG-YA500G from the VF connector of the
AG-HPX500/502.
z
Video signal selected by the RET switch of the camera
adapter is output from the VF OUT connector of the
camera adapter.The RET signal is output from the VF
connector of the AG-YA500G while the RET switch on the
camera adapter or the RET switch on the lens is pushed,
and the signal from the AG-HPX500/502 is output when it
is not pushed.
z
The R TALLY LED on the viewfinder will light up while
recording with the AG-HPX500/502, or when the R TALLY
signal is supplied to this unit.
z
When the BT-LH80W/WU is used rather than the
viewfinder included with the AG-HPX500/502, and the
AG-YA500G VF connector is connected to the
BT-LH80W/WU VF connector with the dedicated VF cable
(BT-CS80G; optional), it is possible to input an HD SDI
signal to the RET IN SDI signal connector of the unit and
have the RET signal in HD format.
z
When this unit, the camera adapter and the AG-HPX500/
502 are combined in a system and the AG-HPX500/502 is
put into MCR mode, the output from the unit will be a dark
screen and video will not be displayed except during
playback by the AG-HPX500/502.
REMOTE
VIDEO IN
REMOTE
CA
OUT
BS IN
CA IN
BS
OUT
SDI OUT1
SDI OUT2
CA VF
CAM
LENS
VF
SDI1
GENLOCK
IN
SDI IN
GENLOCK
OUT
RET OUT
RET SDI
RET
VIDEO
CAM VF
LENS
VF
VF OUT
AG-HPX500/
502
RET
switch
AG-CA300G
AG-BS300P/E
Viewfinder or
BT-LH80W/WU
Lens
AG-YA500G
Prompter
(signal B)
(signal A)
(signal B)
Decoder *
Separation
Multiplex
AG-BS300P_E(VQT2H41)_E.book 12 ページ ２００９年１０月２３日 金曜日 午後６時８分
