20
List of Menus
<SYSTEM>
<GENLOCK> SD mode
<GENLOCK> 180/720 mode
<Note>
The ____ in the Variable Range column indicates the preset mode.
Item / Data Saved
Variable Range
Note
FORMAT
1080-59.94i
1080-23.98PsF
1080-24PsF
1080-50i
720-59.94P
720-50P
720-60P
480-59.94i
576-50i
Displays the format used in this unit.
Status display only.
This cannot be changed by the menu.
CAMERA VF
HD/LCD
SD
Set the format of the viewfinder used on the camera recorder.
HD/LCD:
HD format CRT viewfinder, LCD viewfinder or BT-LH80W/WU
SD:
SD format viewfinder
Item / Data Saved
Variable Range
Note
H PHASE
COARSE
+15
:
0
:
-15
When the system is composed in SD format, coarse adjustment of the phase focusing
for the horizontal synchronization is performed.
H PHASE FINE
+30
:
0
:
-30
When the system is composed in SD format, fine adjustment of the phase focusing for
the horizontal synchronization is performed.
SC PHASE
COARSE
0
:
3
Coarse adjustment of sub-carrier phase of the VIDEO output connector is performed.
SC PHASE FINE
+75
:
0
:
-75
Fine adjustment of sub-carrier phase of the VIDEO output connector is performed.
Item / Data Saved
Variable Range
Note
GL PHASE
HD SDI
COMPOSIT
Select the output signal to lock the phase to the signal input to the GEN LOCK IN
connector.
HD SDI:
HD SDI signal will be locked to the GENLOCK input.
Start position for the video of the down convert signal will be delayed
approximately 90 lines.
COMPOSIT:
Down convert signal will be locked to the GENLOCK input.
Start position for the video of the HD SDI output signal will be forwarded
approximately 90 lines.
<Note>
Set the GL PHASE in the camera recorder to HD SDI.
H PHASE
COARSE
+60 (+40)
:
0 (0)
:
-60 (-40)
When the system is composed in HD format, coarse adjustment of the phase focusing
for the horizontal synchronization is performed.
The value in brackets is the value when in 720P mode.
H PHASE FINE
+100
:
0
:
-100
When the system is composed in HD format, fine adjustment of the phase focusing for
the horizontal synchronization is performed.
AG-BS300P_E(VQT2H41)_E.book 20 ページ 2009年10月23日 金曜日 午後6時8分