23
Specifications
[General]
Operation ambient temperature:
0
°
C to 40
°
C (32 °F to 104 °F)
Storage temperature:
-20
°
C to 60
°
C (-4 °F to 140 °F)
Operation ambient humidity:
10 % to 85 % (relative humidity)
Weight:
approx. 4.8 kg (approx. 10.6 lb)
External dimensions (width
°
height
°
depth):
432 mm
°
44 mm
°
360 mm
17.0 inches
°
1.7 inches
°
14.2 inches
(Excluding rack mount adapter and protrusions such as
leg base)
[Power Supply Unit]
AC IN:
AC inlet
AC 100 V - 240 V, 50/60 Hz, 1.6 A - 0.6 A
DC IN 12 V:
XLR 4 pin, with switch
DC 12 V (DC 11 V - 17 V), 1.1 A
DC OUT 24 V:
Round 5 pin
DC 24 V, maximum 4 A
REMOTE:
Round 10 pin
DC 13 V, 0.3 A
[Transfer Unit]
DC power supply transfer (this unit
>
AG-CA300G):
Maximum 100 m
(When using conductor cross-section area of 3.5 mm
2
or
larger)
Signal transfer (this unit
<>
AG-CA300G):
Maximum 100 m
(When using the 5C-FW BNC cable)
[Analog Signal Input Unit]
GENLOCK IN:
BNC
HD: Analog 3-value sync, ± 0.3 V, 75
h
1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,
720/59.94P, 720/50P
SD: Black burst, 75
h
480/59.94i, 576/50i
RET IN VIDEO:
BNC
VBS, 1 V [P-P], 75
h
480/59.94i, 576/50i
[Analog Signal Output Unit]
VIDEO OUT:
BNC
VBS, 1 V [P-P], 75
h
GENLOCK LOOPOUT:
BNC
[Digital Signal Input Unit]
RET IN SDI:
BNC, 75
h
For HD SDI, compliant to SMPTE292M/299M Standard
1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,
720/59.94P, 720/50P
For SD SDI, compliant to SMPTE259M-C/272M-A
ITU-R.BT656-4 standards
480/59.94i, 576/50i
CA IN:
BNC, 75
h
[Digital Signal Output Unit]
SDI OUT1:
BNC, 0.8 V [P-P], 75
h
For HD SDI, compliant to SMPTE292M/299M Standard
1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,
720/59.94P, 720/50P
For SD SDI, compliant to SMPTE259M-C/272M-A
ITU-R.BT656-4 standards
480/59.94i, 576/50i
SDI OUT2:
BNC, 0.8 V [P-P], 75
h
For HD SDI, compliant to SMPTE292M/299M Standard
1080/59.94i, 1080/23.98PsF, 1080/24PsF, 1080/50i,
720/59.94P, 720/50P
For SD SDI, compliant to SMPTE259M-C/272M-A
ITU-R.BT656-4 standards
480/59.94i, 576/50i
CA OUT:
BNC, 75
h
[Control Unit]
REMOTE:
Round 10 pin
[External Device Connection Unit]
INCOM/TALLY:
D-Sub 9 pin
INCOM:
4-wire format 0 dBm (600
h
balanced)
RTS format
1 V [P-P] (200
h
balanced)
TALLY:
Switchable between supplied voltage and contact
DC 12 V maximum for supplied voltage (8 V to 12 V)
[Intercom Unit]
INCOM:
XLR 5 pin
Inrush current, measured according to European standard
EN55103-1: 10.0 A
Weight and dimensions when shown are approximately.
Specifications are subject to change without notice.
Input: AC 100 V - 240 V, 50/60 Hz, 1.6 A - 0.6 A
DC 12 V, 1.1 A
Output: DC 24 V, 4 A
indicates safety information.
AG-BS300P_E(VQT2H41)_E.book 23 ページ ２００９年１０月２３日 金曜日 午後６時８分
