Manual recording
50
DVQX2103 (ENG)
AE level (exposure compensation)
1
Select the [SCENE FILE] menu
→
[AE LEVEL]
→
[ON].
2
Select the [CAMERA] menu
→
[SW MODE]
→
[REAR RING]
→
[IRIS/AE LEVEL].
3
When the <AUTO/MANU> switch is set to manual mode, use one of the
following operations to switch one of iris, gain, or shutter speed to auto.
≥
Press the <IRIS> button to switch to auto iris mode.
≥
Press the <GAIN> button to switch to auto gain mode.
≥
Press the <SHUTTER> button to switch to auto shutter mode.
4
Rotate the rear ring.
@
NOTE
0
When manual iris mode is enabled, the iris is adjusted when the rear ring is turned.
Focusing (manual focus)
1
Switch to <MANU> with the <AUTO/MANU> switch to enter manual mode.
2
Press the <FOCUS A/M/
¶
> button to switch to manual focus mode.
[AF] and [MF] switch each time you press the button. The focal point goes to infinity after
you press and hold the button, and then the manual focus mode is engaged.
3
Rotate the focus ring.
White balance adjustment
Follow the steps below to adjust the white balance
automatically.
≥
White balance/black balance adjustment is done
using the [AWB] USER button function. Make the
settings beforehand.
It is set in the [USER6] button icon at the time of
purchase.
To display the operation icon, touch and hold the
screen for approximately 2 seconds while the camera recording screen is being displayed.
F1:
AWB
AREA
FACE DETECT
ZEBRA
MENU
COUNTER
RESET
F2:
*****
F3:
*****
F4:
*****
F5:
*****
F6:
*****
AG-CX7_CX8_CX10-DVQX2103_eng.book 50 ページ 2020年1月6日 月曜日 午後2時48分