11
A
GAIN switch
When the camera screen is too dark, change
the setting of this switch to boost the gain and
make the screen brighter. The M and H gain
values are set using the MID GAIN item and
HIGH GAIN item on the setting menu SW
MODE screen. (See page 39)
L :
The switch is normally kept at this
position. (0 dB)
M :
The gain of the camera video amplifier is
boosted. (Factory setting: 6 dB)
H :
The gain of the camera video amplifier is
further boosted. (Factory setting: 12 dB)
B
WHITE BAL switch
This is used to set the white balance.
A or B:
The white balance value adjusted by the
AWB button
C
is stored in the memory.
PRST (preset):
Set the switch to this position in cases
where, for instance, there is no time to
adjust the white balance.
The 3200K and 5600K white balance
values are stored in the memory.
Press the AWB button to switch between
the two values.
O
The ATW (Auto Tracking White) function
can be allocated to the A, B or PRST
position using the ATW item on the setting
menu SW MODE screen. (See page 39)
O
What kind of light source is being used
during shooting is determined by the white
balance sensor.
Do not block the front of the white balance
sensor with your hand or any other object
during shooting or the ATW function will
not operate properly.
Summary of Contents for AG-DVC80
Page 24: ...24 ...
Page 61: ...Memo ...
