17
Chapter
1 Applying Eff
ects to
Video and Sound
Setting Audio Effects
The [AUDIO EFFECTS] menu is used to process sound.
Audio effects can be set for each input source.
To execute the audio effects
Press the AUDIO EFFECTS execution button.
The AUDIO FOLLOW VIDEO button can be pressed to turn
on to link the video effects and the audio effects during
execution of transition or fade.
[AUDIO EFFECTS] Menu
The menu appears when the AUDIO EFFECTS button is
pressed.
POS.
PAN
IN CH
BALANCE
OFF
L
EQ
EQ
1
ON
L LEVEL
0
0
0
0.5
H LEVEL
Q
MID
M LEVEL
0
FREQ
VOICE
LEVEL
PITCH
1.01kHZ
5
OFF
UP
OFF
AB
CHANGE
MUTE
EVENT
AUDIO EFFECTS
ME TIME
PATTERN
INT
00
E
02:00
F
0056 WHT
X 128
Z 512
Y 128
1 - 8
AUX
Scroll the screen to display.
Select the input source using the rotary 1 control.
[1] to [8]:
Input sources 1 to 8
[AUX]:
AUX input
Select the effect to set using the rotary 2 control.
[PAN]
[PAN] is set to change the audio balance between left and
right.
Rotary 2
Rotary 3
Rotary 4
Rotary 5
OFF
ON
L
R
L+R
L7
L6
L1
0
R1
R2
R7
PAN
OFF
L
IN CH
0
BALANCE
Select [ON] or [OFF] to specify whether or not to apply the
effect using the rotary 3 control.
The factory default setting is [OFF].
Set [IN.CH] to [L], [R], or [L+R] using the rotary 4 control.
[IN.CH] is used to select the channel to be emphasized.
L:
Left channel
R:
Right channel
L+R:
Both left and right channels
The factory default setting is [L].
Set [BALANCE] in the range of L7 to 0 and 0 to R7 using
the rotary 5 control.
[BALANCE] is used to select whether to expose the
channel selected with [IN.CH] toward the right direction
(R) or left direction (L) and to set the gap from the center
position using a numeric value.
The factory default setting is 0 (center).
[EQ]
[EQ MID] is used to adjust the high-range or mid-range
audio level and set equalizer effects.
Rotary 2
Rotary 3
Rotary 4
Rotary 5
OFF
ON
–14dB - 14dB
–14dB - 14dB
EQ
ON
0
L LEVEL
0
H LEVEL
Select [ON] or [OFF] to specify whether or not to apply all
equalizer effects using the rotary 3 control.
The factory default setting is [ON].
Set the [L LEVEL] (low-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 4 control.
The factory default setting is [0].
Set the [H LEVEL] (high-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 5 control.
The factory default setting is [0].
[EQ MID]
Rotary 2
Rotary 3
Rotary 4
Rotary 5
–14dB - 14dB
0.5
1
2
5
100Hz-10.2kHz
MID
EQ
0
M LEVEL
1.01kHz
FREQ
0.5
Q
Set the [M LEVEL] (mid-range level in dB) in the range of
[–14dB] to [14dB] in 2 dB steps using the rotary 3 control.
The factory default setting is [0].
Set the [FREQ] (Frequency to be emphasized) in the range
of [100Hz] to [10.2kHz] using the rotary 4 control.
The factory default setting is [1.01kHz].
