36
Basic Oper
ation
For luminance keying, chroma keying or
external keying, apply effects such as slice and
slope to the key video (
page Vol.2-6).
5
Set the pattern position (where the key is
inserted) using the joystick.
0RESSTHE#%.4%2BUTTONTOTURNONANDTHEPATTERN
position is set to the center.
0RESSTHE(/,$BUTTONTOTURNONANDTHEJOYSTICKIS
fixed to the current position.
NOTE
There are some patterns for which the position
s
cannot be adjusted with the joystick.
For more information, refer to “List of Key
Patterns” at the back of Volume 2.
For the patterns registered as direct patterns, the
s
settings of the effects and position applied to each
pattern are saved in memory and applied when the
pattern is called next time (if [MODE] in the [SETUP]
menu is set to [PRESET]). Any settings made for the
patterns not registered as direct patterns are not
saved in memory.
6
Set the pattern size (key size) using the rotary
Z control.
)FASPECIlCKEYPATTERNISSELECTEDPRESSTHE
ASPECT button to turn on, and the aspect ratio
of the pattern can be temporarily changed with
THE!30%#4CONTROL7HENITISTURNEDINTHE(
DIRECTIONTHEWIDTHHORIZONTAL ISINCREASEDWHEN
ITISTURNEDINTHE6DIRECTIONTHEHEIGHTVERTICAL IS
INCREASED 7HENTHEBUTTONISTURNEDOFFTHEASPECT
ratio returns to the value before change.
For patterns to which the aspect change function
CANBEAPPLIEDREFERTOh,ISTOF+EY0ATTERNSvATTHE
BACKOF6OLUME
7
Set the transition time (from combining start to
end) (
page 35).
8
Slide the transition lever to the B side (or A
side) or press the AUTO TAKE button.
7HENTHE!54/4!+%BUTTONISPRESSEDITISLIGHTED
and source video A is combined with B (or source
VIDEO"ISCOMBINEDWITH!
To use the Scene Grabber function
0RESSTHE3#%.%'2!""%2BUTTONTOTURNON
The scene grabber function allows you to move the image
CURRENTLYBEINGDISPLAYEDINTHEKEYTOGETHERWITHTHE
PATTERNIFASPECIlCKEYPATTERNISSELECTED
For patterns to which the Scene Grabber function can
BEAPPLIEDREFERTOh,ISTOF+EY0ATTERNSvATTHEBACKOF
Volume 2.
NOTE
You cannot use multi-strobe effects (
page Vol.2-15) and
the scene grabber function at the same time. Whichever is
selected later has priority and the other selected earlier is
canceled.
To display the key inverted
0RESSTHE2%6%23%BUTTONINTHE0!44%2.AREATOTURNON
ANDTHEKEYPATTERNORFRAMEINOUTISDISPLAYEDINVERTED
Downstream Key (DSK)
$3+ISANEFFECTOFINSERTINGAKEYTOTHEVIDEOTOWHICH
effects have already been applied.
4HEFOLLOWINGDIAGRAMSHOWSANEXAMPLEOFTHE$3+
To create DSK using material imported
from PC
Input material such as characters created with a single
COLORASABACKGROUNDON0#TOTHE$6))).CONNECTOR
SELECTTHE$6))INPUTASKEYMATERIALFOR$3+SET;+%9=TO
;$6))=INTHE;$3+3/52#%=SUBMENUOFTHE;$3+&!$%=
MENU ANDYOUCANINSERTAKEYONTOVIDEOCREATEDBY
APPLYINGEFFECTSTOANIMAGETAKENWITHACAMERA
)TISALSOPOSSIBLETOEMBEDOTHERMATERIALASTHEKEYlLLIN
THEKEYEXTRACTEDFROMTHEORIGINALMATERIALORAPPLYEFFECTS
SUCHAS3(!$/7TOTHEEXTRACTEDKEY
Summary of Contents for AG-HMX100P
Page 47: ...MEMO 47 ...
