37
Basic Oper
ation
The following figure shows an example connection of
source equipment, PC, and this unit.
HMX100
SDI IN 3
SDI IN 4
DVI-I IN
AG-HMX100P/HMX100E
Professional-use
camera
PC
P2 mobile
SDI (video and
audio) input
DVI-I input
To execute DSK
$3+ISEXECUTEDWITHTHE$3+EXECUTIONBUTTON
1
Confirm that the DSK execution button is off.
2
Select the video connector to which input
video used for the key source to be inserted
and for the key fill fit in the key is output
(
page Vol.2-11).
3
Press the DSK selector button.
9OUCANPREVIEWOUTPUTVIDEOTOWHICHTHE$3+IS
inserted.
4
Set the detection level of the key video
by changing slice or slope setting
(
page Vol.2-6).
5
Set the DSK transition time (from insertion start
to end) (
“To set the DSK transition time” on
this page).
6
Press the DSK execution button.
4HEBUTTONISLIGHTEDANDmASHESWHILETHEKEYIS
being inserted.
To use a transition pattern as DSK
0RESSTHE$3+%&&%#43BUTTONTOTURNONANDSELECT
a transition pattern instead of selecting preset video
(
PAGE
The dissolve effect is applied.
NOTE
It is impossible to use a pattern other than transition patterns
for DSK.
If a pattern unavailable for DSK is selected, the DSK EFFECTS
button flashes.
To set the DSK transition time
4HECURRENTLYSET$3+TRANSITIONTIME$3+4)-% ISSHOWN
in the area where the event number, transition time, pattern
number, and internal video are displayed on the setting
screen (
PAGE
The factory default setting is [02:00
F
=SECONDS
1
Press the DSK setting button to turn on.
2
Set the DSK transition time by entering a
numeric value with the numeric keys or using
the TIME rotary control.
Example: To set “2:05” (2 seconds 5 frames),
enter “2.5.”
4HE;3934%-=SUBMENUOFTHE;3%450=MENUCAN
be used to select the transition time display form
hSECONDSFRAMESvORhFRAMESv
PAGE6OL
3
Press the key.
Summary of Contents for AG-HMX100P
Page 47: ...MEMO 47 ...
