7
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Applicable standards and operating environment (AG-HMX100E)
The apparatus is compliant with:
sSTANDARDS%.AND%.AND
sELECTROMAGNETICENVIRONMENTS%%%AND%
2. Pre-requisite conditions to achieving compliance with the above standards
<1> Peripheral equipment to be connected to the apparatus and special connecting cables
s4HEPURCHASERUSERISURGEDTOUSEONLYEQUIPMENTWHICHHASBEENRECOMMENDEDBYUSAS
peripheral equipment to be connected to the apparatus.
s4HEPURCHASERUSERISURGEDTOUSEONLYTHECONNECTINGCABLESDESCRIBEDBELOW
<2> For the connecting cables, use shielded cables which suit the intended purpose of the
apparatus.
s6IDEOSIGNALCONNECTINGCABLES
Use double shielded coaxial cables, which are designed for 75-ohm type high-frequency
APPLICATIONSFOR3$)3ERIAL$IGITAL)NTERFACE
Coaxial cables, which are designed for 75-ohm type high-frequency applications, are
recommended for analog video signals.
s!UDIOSIGNALCONNECTINGCABLES
)FYOURAPPARATUSSUPPORTS!%3%"5SERIALDIGITALAUDIOSIGNALSUSECABLESDESIGNEDFOR!%3%"5
Use shielded cables, which provide quality performance for high-frequency transmission
applications, for analog audio signals.
s/THERCONNECTINGCABLES)%%%53"
Use shielded cables, which provide quality performance for high-frequency applications, as
connecting cables.
s7HENCONNECTINGTOTHE$6)SIGNALTERMINALUSEACABLEWITHAFERRITECORE
s)FYOURAPPARATUSISSUPPLIEDWITHFERRITECORES THEYMUSTBEATTACHEDONCABLES FOLLOWING
instructions in this manual.
3. Performance level
The performance level of the apparatus is equivalent to or better than the performance level required by
these standards.
(OWEVERTHEAPPARATUSMAYBEADVERSELYAFFECTEDBYINTERFERENCEIFITISBEINGUSEDINAN%-#
environment, such as an area where strong electromagnetic fields are generated (by the presence
OFSIGNALTRANSMISSIONTOWERSCELLULARPHONESETC )NORDERTOMINIMIZETHEADVERSEEFFECTSOFTHE
INTERFERENCEONTHEAPPARATUSINCASESLIKETHISITISRECOMMENDEDTHATTHEFOLLOWINGSTEPSBETAKENWITH
the apparatus being affected and with its operating environment:
1. Place the apparatus at a distance from the source of the interference.
2. Change the direction of the apparatus.
3. Change the connection method used for the apparatus.
4. Connect the apparatus to another power outlet where the power is not shared by any other
appliances.
Read this first! (For AG-HMX100E) (continued)
Pursuant t
o
at the directive 2004/108/EC, article 9(2)
Panas
o
nic Testing Centre
Panas
o
nic Service Eur
o
pe, a divisi
o
n
o
f Panas
o
nic Marketing Eur
o
pe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
Summary of Contents for AG-HMX100P
Page 47: ...MEMO 47 ...
