166
Menu : Menu Description Tables
The ____ in the Adjustable Range column indicates the
preset mode.
Notes
z
The items indicated by
are the setting items for PAINT
MENU SW(
) R/W in the <SD CARD R/W SELECT>
screen. The items without
are the setting items for
PAINT MENU LEVEL R/W. Please refer to [SD CARD R/
W SELECT] (page 187) for more information.
z
If images are shot when the master gain is set to –3dB,
some coloring phenomena may occur on images in very
bright sections. The color phenomena become more
significant as the difference in the color temperature of the
subject incident to the unit from 3200K becomes larger.In
order to suppress the coloring phenomena, switch the
OUTPUT AUTO KNEE switch to “CAM AUTO KNEE OFF”,
set the MANUAL item on the KNEE/LEVEL screen to “ON”,
and then set a smaller value for the KNEE SLOPE item and
WHITE CLIP LVL item on the KNEE/LEVEL screen. After
executing these settings, confirm that there are no coloring
phenomena and then start shooting.
Items/
Data Saved
Adjustable
Range
Remarks
R(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
red.
S C U F R
R-Mg(PHASE) –63
:
+00
:
+63
For performing the hue correction
between red and magenta.
S C U F R
Mg(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
magenta.
S C U F R
Mg-B(PHASE) –63
:
+00
:
+63
For performing the hue correction
between magenta and blue.
S C U F R
B(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
blue.
S C U F R
B-Cy(PHASE)
–63
:
+00
:
+63
For performing the hue correction
between blue and cyan.
S C U F R
Cy(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
cyan.
S C U F R
Cy-G(PHASE) –63
:
+00
:
+63
For performing the hue correction
between cyan and green.
S C U F R
G(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
green.
S C U F R
G-Yl(PHASE)
–63
:
+00
:
+63
For performing the hue correction
between green and yellow.
S C U F R
Yl(PHASE)
–63
:
+00
:
+63
For performing the hue correction for
yellow.
S C U F R
Yl-R(PHASE)
–63
:
+00
:
+63
For performing the hue correction
between yellow and red.
S C U F R
COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction of the
position selected with the GAIN switch
(L, M, H).
S C U F R
LOW SETTING
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–3dB
:
0dB
:
30dB
Select the master gain from –3, 0, 3, 6,
9, 12, 15, 18, 21, 24, 27, or 30dB.
S C U F R
H.DTL LEVEL 00
:
10
:
63
For performing the horizontal detail
correction level setting.
S C U F R
V.DTL LEVEL 00
:
15
:
31
For performing the vertical detail
correction level setting.
S C U F R
DTL CORING 00
:
01
:
15
For performing the noise elimination
level setting for detail.
S C U F R
H.DTL FREQ. 00
:
18
:
31
For performing the horizontal detail
frequency selection.
S C U F R
LEVEL
DEPEND.
0
1
:
5
For setting the LEVEL DEPEND.
When the Y-detail is emphasized, details
of dark sections are compressed.
If the numerical value is larger, details of
bright sections are also compressed.
S C U F R
MASTER
GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma. (0.01
step)
S C U F R
BLACK
GAMMA
–3
:
OFF
:
+3
For setting the gamma curve for the dark
portion.
–
3 to
–
1:
The dark portion is compressed.
OFF:
Standard state
+1 to +3:
The dark portion is extended.
S C U F R
MATRIX
TABLE
OFF
A
B
For selecting the color correction table
for the linear matrix.
S C U F R
COLOR
CORRECT
ON
OFF
For switching ON/OFF of the 12-axis
independent color correction.
S C U F R
AJ-HPX3000G(VQT1D27)E.book 166 ページ ２００７年９月３日 月曜日 午後２時３４分
