– 125 –
Chapter 7 Menu Operations — Menu list
Item
Description of settings
Remark
CAMERA MODE
Sets the camera shooting mode when set to [1080-59.94i], [480-59.94i],
[1080-50i], and [576-50i].
f
Displayed only when the [SYSTEM MODE] item
is set to [1080-59.94i], [1080-50i], [480-59.94i], or
[576-50i].
f
This setting is not available in the following cases:
- The [REC SIGNAL] item is set to [SDI IN].
- The [SYSTEM MODE] item is set to
[1080-59.94i], and the [REC FORMAT] item is
set to other than [DVCPROHD/60i].
- [SYSTEM MODE] is set to [1080-50i], and
the [REC FORMAT] item is set to other than
[DVCPROHD/50i].
- Clip connection is underway with one-clip
recording.
r
When [SYSTEM MODE] is [1080-59.94i] or [480-59.94i]
[60i], [30P], [24P], [24PA]
r
When [SYSTEM MODE] is [1080-50i] or [576-50i]
[50i], [25P]
SCAN REVERSE
Compensates image inversion that occurs when a lens for filming or anamorphic
lens is mounted.
[ON], [OFF]
ASPECT CONV
Selects aspect ratio for images recorded with 480i or 576i.
f
This setting is not available when the [SYSTEM
MODE] item is [1080-59.94i], [1080-23.98PsF],
[1080-50i], [720-59.94P], or [720-50P].
f
This setting is not available when clip connection
is underway with one-clip recording.
[SIDE CROP]
Side-crop mode (Crops the left and right edges.)
[LETTER BOX]
Letterbox mode (Adds black bands at the top and bottom of the
image.)
[SQUEEZE]
Squeeze mode (Squeezes images horizontally.)
SETUP
Sets the setup level of video signals for 480i.
f
This item is not displayed when the [SYSTEM
MODE] item is set to [1080-50i], [720-50P], or
[576-50i].
[0%]
Composite output and recording setup levels will both be set
to 0%.
[7.5%A]
Composite output setup level will be set to 7.5%, while
recording setup level will be set to 0%.
indicates factory setting values.
[SW MODE] screen
Item
Description of settings
Remark
LOW GAIN
Sets the gain value assigned to the L position of the <GAIN> switch.
[
−
3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
MID GAIN
Sets the gain value assigned to the M position of the <GAIN> switch.
[
−
3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
HIGH GAIN
Sets the gain value assigned to the H position of the <GAIN> switch.
[
−
3dB], [0dB], [3dB], [6dB], [9dB], [12dB]
ATW
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
f
When the <WHITE BAL> switch is set to the
<B> position and this menu is set to [Bch],
pressing the <USER> buttons (<USER
MAIN>/<USER1>/<USER2>) to which the auto
tracking white balance function is assigned
does not turn off the auto tracking white balance
function.
[Bch]
Activates the auto tracking white balance function when the
<WHITE BAL> switch is set to the <B> position.
[OFF]
Does not assign the auto tracking white balance function to the
<WHITE BAL> switch.
W.BAL.PRESET
Sets the color temperature assigned to the <PRST> position of the <WHITE BAL>
switch.
Each time the <AUTO W/B BAL> switch is pushed towards the <AWB> side,
color temperature can be switched to 3200 K, 5600 K, and user-specified variable
value.
[3.2K], [5.6K], [VAR]
f
The color temperature when [VAR] is selected is
set at the [CAM03:SETUP] screen of SmartUI.
USER MAIN
Sets the function assigned to the <USER MAIN> button. (page 60)
[SPOT LIGHT], [BACK LIGHT], [ATW], [ATW LOCK], [GAIN:18dB],
[D.ZOOMX2], [D.ZOOMX4], [FBC], [Y GET], [WFM], [PRE REC], [REC
REVIEW], [TEXT MEMO], [SHOT MARK], [SLOT SEL], [A.MONI SEL], [PC
MODE], [INHIBIT]
f
[SPOT LIGHT] and [BACK LIGHT] functions
do not work when the remote control unit
(AJ-RC10G) or the extension control unit
(AG-EC4G) is connected.
f
When the dynamic range stretcher function is
activated, the digital zoom function is disabled.
USER1
Sets the function assigned to the <USER1> button.
The setting contents are the same as [USER MAIN].
[BACK LIGHT]
USER2
Sets the function assigned to the <USER2> button.
The setting contents are the same as [USER MAIN].
[TEXT MEMO]
RET SW
Sets the function assigned to the <RET> button of lens.
[PUSH AF], [D.ZOOMX2], [D.ZOOMX4], [REC REVIEW], [TEXT MEMO], [SHOT
MARK], [INHIBIT]
f
The function assigned to the <RET> button does not work when [INHIBIT] is
selected.
f
When an auto-focus compatible lens is not
attached, the operation is disabled even if [PUSH
AF] is selected.
indicates factory setting values.
