114
Item
Display
mode
Description of settings
SCENE FILE
P2
(Camera)
You can save four SCENE FILE settings to the SD memory card, and can also
title the saved files.
READ:
Read
WRITE:
Write
USER FILE
P2
(Camera)
You can save four file settings (excluding SCENE FILE) to the SD memory
card, and can also title the saved file.
READ:
Read
WRITE:
Write
SD CARD FORMAT
P2
(Camera)
Formats the SD memory cards.
CARD FUNCTIONS screen
Item
Display
mode
Description of settings
REMOTE
P2
TAPE
(Camera)
(MCR/
VCR)
Sets the operations of the supplied remote control unit. (Remote control setup
(Page 18))
VCR1:
Accepts commands from the remote control set for VCR1.
VCR2:
Accepts commands from the remote control set for VCR2.
OFF:
Operations are not accepted from any remote control.
1394 CONTROL
P2
TAPE
(Camera)
Sets the control method for backup recording using a backup unit connected to
the 1394 terminal.
OFF:
The backup unit is not controlled.
EXT:
The backup unit can be controlled by the START/STOP button. The images
shot by the camera recorder are recorded by the backup unit. Note that the
camera recorder does not record them.
BOTH:
The images shot by the camera recorder are recorded by both the camera
recorder and backup unit.
CHAIN:
When the camera recorder’s media approaches its end during shooting, the
backup unit in the recording stand-by mode automatically starts recording
images.
1394 CMD SEL
P2
TAPE
(Camera)
Sets how the START/STOP button works for the backup unit.
REC_P:
This switches between recording and pause.
STOP:
This switches between recording and stop.
<Note>
If the backup unit does not have a rec pause function, select STOP.
indicates the factory setting.
OTHER FUNCTIONS screen
Setup menu list (continued)
