62
The camera is now in the MCR mode.
• Each time you press the button, the mode
changes as below.
MCR
CAMERA
When you press the mode button while
MCR is selected, the unit enters the PC (PC
connection) mode. (Page 82)
Operations using the OPERATION button
Remote Control
Play ( )
When this button is pressed in stop mode, playback will start from the
first clip selected.
During playback, the unit enters the variable speed search mode and
starts 1x playback. (Page 73)
INDEX
STOP
INDEX
STILL ADV PAUSE STILL ADV
PLAY
INDEX
STOP
V
-
/REW
FF/
Fast-forward (
)
When this button is pressed during playback, the clips are advanced
from a point in the clip already selected (at four times normal speed).
When the thumbnail screen is cancelled, you can also perform this
operation while the camera is stopped.
When this button is held down, the playback speed becomes faster
(32x speed).
When pressed during a pause, playback advances one clip.
INDEX
STOP
INDEX
STILL ADV PAUSE STILL ADV
PLAY
INDEX
STOP
V
-
/REW
FF/
Rewind (
)
When this button is pressed during playback, the clips are rewound
from a point in the clip already selected (at four times normal speed).
When the thumbnail screen is cancelled, you can also perform this
operation while the camera is stopped.When this button is held down,
the playback speed becomes faster (32x speed).
When pressed during a pause, playback goes back one clip.
INDEX
STOP
INDEX
STILL ADV PAUSE STILL ADV
PLAY
INDEX
STOP
V
-
/REW
FF/
Stop ( )
INDEX
STOP
INDEX
STILL ADV PAUSE STILL ADV
PLAY
INDEX
STOP
V
-
/REW
FF/
Pause ( )
Press again to return to playback.
INDEX
STOP
INDEX
STILL ADV PAUSE STILL ADV
PLAY
INDEX
STOP
V
-
/REW
FF/
Basic playback operations (P2 card)
P2
For details on playing back clips using thumbnails, see page 64.
1
Before turning the POWER switch to ON
Set the MEDIA switch to the P2 position.
2
Turn the POWER switch to ON.
While pressing the lock release, turn the
POWER switch to ON.
3
Press the mode button so the MCR lamp
turns on.
