- 180 -
¥
Install the security certificate
When using HTTPS to access the Camera Head or this unit, the security warning screen will be displayed if the
security certificate of the said Camera Head or this unit has not been installed in your personal computer. To prevent
this warning screen being displayed, the security certificate must be installed in accordance with the following
procedures. If it is not installed, the security warning screen will be displayed every time the camera is accessed.
1
Accessing the Camera Head or this unit by HTTPS
2
When the security warning screen is displayed, click [Continue to this website (not
recommended).].
≥
The live screen [Live] is displayed.
When the authentication screen is displayed, input the user name and password.
3
Click [Certificate error] in the URL and then click [View
certificates].
≥
The security certificate will be installed to your personal computer based on the content set for [Common Name].
The content set for the “Host Name” must therefore match that set for the address/host name used to access the
Camera Head or this unit. If the content differs, a security warning screen will be displayed every time the camera
is accessed.
≥
A security warning screen will be displayed if the Camera Head or this unit address/host name is changed even
when a security certificate has been installed. Reinstall the security certificate.
≥
When connecting the camera to the Internet, set the address or host name to be accessed from the Internet in
[Common Name]. In this case, when accessing the camera locally, a security warning screen is displayed every
time the camera is accessed even when a security certificate is installed.
≥
When the above screen is displayed after accessing a device apart from the Camera Head or the unit or a website
whose address is not the address specified for the Camera Head or the unit, there may be a security problem, so
please be careful.
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 180 ページ ２０１７年５月２２日 月曜日 午後２時１１分
