- 54 -
∫
To change the way you adjust focus with the focus ring
Select the menu.
∫
To emphasize the outline of images
Setting [EVF/LCD DETAIL] to [ON] helps you achieve focus easier by emphasizing the outlines of
an image displayed on the LCD monitor and viewfinder.
You can also adjust the emphasis level or change the frequency.
≥
You can also enable or disable this function with the applicable USER button. (
)
≥
These settings will not affect the images actually recorded.
Adjusting the level of [EVF/LCD DETAIL]
1
Select the menu.
2
Touch
/
to adjust settings.
≥
You can select a value between
s
3 and
r
3.
3
Touch [EXIT] to complete the setting.
Setting the peaking frequency of [EVF/LCD DETAIL]
Select the menu.
≥
[EVF/LCD DETAIL] is canceled in following cases:
j
If you use Focus Assist (peaking) (
: [SW SETUP]
#
[
FOCUS RING DRIVE]
[SPEED]:
Adjusts the focus value according to the speed at which the focus ring is
rotated.
[COARSE]:
Adjusts the focus value according to the rotational position of the focus
ring. Since the operation of the focus ring results in a greater change in
focus value, this setting is suitable for making rough adjustments.
[FINE]:
Adjusts the focus value according to the rotational position of the focus
ring. Since the operation of the focus ring results in a smaller change in
focus value, this setting is suitable for making fine adjustments.
: [DISP SETUP]
#
[EVF/LCD DETAIL]
#
[ON]
: [DISP SETUP]
#
[EVF/LCD PEAK LEVEL]
: [DISP SETUP]
#
[EVF/LCD PEAK FREQ.]
#
[HIGH] or [LOW]
MENU
MENU
MENU
MENU
AG-UX180ED(DVQP1171ZA)_E.book 54 ページ ２０１６年１１月２８日 月曜日 午前１１時３２分
