Using the zoom function – Adjusting the zoom position
169
Adjusting the zoom position
The zoom can be operated at the following 3 locations:
•
Zoom lever (on the handle)
•
Zoom lever (on the grip)
•
Zoom ring
(A) Zoom lever (on the handle)/(B) Zoom lever (on the grip)
<T>:
Zoom in the image.
<W>:
Zoom out the image.
(C) Zoom ring
A side:
Zoom out the image.
B side:
Zoom in the image.
•
In the [ZOOM RING] menu, you can also change the turn direction for the zoom ring and change the zoom control.
(
)
(D) Zoom ratio
•
The zoom ratio can be confirmed between [Z00]/[iZ00] (maximum wide angle) to [Z99]/[iZ99] (maximum telephoto) on the
screen display. The value becomes higher as the unit zooms in and smaller as the unit zooms out.
About the zoom speed
•
The zoom speed changes with the amount that the zoom lever (on the grip) is pushed or the speed that the zoom ring is
turned.
•
The zoom is at a steady rate with the zoom lever (on the handle).
Performs the zoom operation with the speed set in the [CAMERA] menu
¨
[SW MODE]
¨
[H.ZOOM SPEED].
•
If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded. When returning the
zoom lever to the original position, move it quietly.
•
The units for the zoom ratio can be changed in the [ZOOM/FOCUS] menu. (
)
(B)
(A)
A
B
A
B
(C)
Z00
(D)
