background image

15

Manufactured under license from Dolby Laboratories.
“Dolby,”  “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

Notes on connecting an optical
digital audio cable

 (optional)

• Firmly connect the cable to the

connector.

Caution for optical digital audio output connector:

• When connecting an amplifier (with an Optical Digital Input Connector) which does not

contain the Dolby Digital or DTS decoder, be sure to select “PCM” at “Dolby Digital”
and “PCM” at “dts” of the Settings for DVD Operation “Audio Output” (see p. 53).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may
be harmful to your ears and damage your speakers.

• When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or

“Dolby Digital” of the Settings for DVD Operation “Audio Output”.
If “PCM” is selected, there will be stereo sound. (See p. 53.)

• CDs can be played as usual.
Note:

• Some DTS decoders which do not support DVD-DTS interface may not work properly with DECK.

Amplifier

DVD/VCR DECK
(Rear)

Front

Speaker

Front
Speaker

Surround
Speaker

Surround

Speaker

Center
Speaker

Subwoofer

Decoder with

Dolby Digital /DTS

processing (optional)

Optical Digital
Audio Cable
(optional)

To Optical
Digital Audio
Input Connector

[5.1ch Surround system]

When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]

Connecting Amplifier (5.1 ch Surround system) [Digital connection]
DECK

 

 

 

 Dolby Digital Decoder

 

 

 

 Amplifier

 

 

 

 Speaker

or

DECK

 

 

 

 DTS

 (Digital Theater Systems)

 Decoder

 

 

 

 Amplifier

 

 

 

 Speaker

Manufactured under license from Digital Theater Systems, Inc. US Pat. No’s. 5,451,942,
5,956,674, 5,974,380, 5,978,762, 6,487,535 and other US. and world-wide patents issued and
pending. “DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.

Initial Setup

(Connection)

AG-VP310 P1-25 (040510).p65

2004/05/10, 15:01

15

Summary of Contents for AGVP310 - DVD/VCR DECK

































































Reviews: