– 20 –
HOME SET UP menu
∑
Reference
OUT REF: This sets the video output signal reference.
AUTO:
When the REF VIDEO connector input sig-
nal is available, the output reference is
locked to REF VIDEO; when it is not avail-
able, it is locked to the INPUT input signal.
When neither the REF VIDEO nor INPUT
input signal is available, the internal signal
serves as the reference.
Depending on the format, the sequence of
priority is as follows:
HD mode:
HD REF
N
SD REF
N
INPUT
N
FREE
SD mode:
SD REF
N
HD REF
N
INPUT
N
FREE
INPUT:
When the INPUT input signal is available,
the output reference is locked to the INPUT
signal; when it is not available, the internal
signal serves as the reference.
HD REF: When the HD REF input signal is available
at the HD REF IN connector, the output ref-
erence is locked to the REF signal; when it
is not available, the internal signal serves as
the reference.
SD REF: When the SD REF input signal is available
at the SD REF IN connector, the output ref-
erence is locked to the REF signal; when it
is not available, the internal signal serves as
the reference.
Operation
(1) Press the center cursor key.
The cursor now appears.
(2) Move the cursor to the item to be set using the cursor keys.
The selected item now blinks.
(3) Press the ENT key. The setting is now entered.
°
In the 720/59p mode, use the SD REF for synchronization with an external component. (In this mode, SD REF or
SF FREE is used.)
°
When AUTO has been set, the sequence of priority is as follows: SD REF
N
FREE.
Center cursor key
Cursor key
OUT REF:
INPUT
Summary of Contents for AJ-HD2000
Page 193: ... 193 ...
