144
Connection with external device: Connection of the remote control unit (AJ-RC10G)
Menu option
GAMMA menu
z
The options available in GAMMA-MODE-SEL are as
follows.
HD, SD, F-LIKE1, F-LIKE2, F-LIKE3, FILM-REC,
VIDEO REC
z
DYMC-LVL and BSR-LVL are added to the 4th layer.
The variable ranges for these are as follows.
DYMC-LVL: 200% - 600%
BSR-LVL: 00% - 30%
Note, however, that these values can only be changed
when “FILM-REC” has been selected in GAMMA-
MODE-SEL.
z
V-KNSLP and V-KNPNT are added to the 5th layer.
The variable ranges for these are as follows.
V-KNSLP: 150% - 500%
V-KNPNT: 30% - 107%
Note, however, that these values can only be changed
when “VIDEO REC” has been selected in GAMMA-
MODE-SEL.
WHITE menu
z
The variable range of COLR-TEMP-PRE, TEMP-A
and TEMP-B is 2300K
- 15000K
.
KNEE menu
z
CHROMA LEVEL is added to the 5th layer.
The variable range for this is OFF/–99% - 40%.
z
HI-COLOR-LVL is added to the 6th layer.
The variable range for this is 1 - 32.
z
DRS MODE is added to the 7th layer.
The variable range for this is MODE1/MODE2.
z
DRS EFFECT DEPTH is added to the 8th layer.
The variable range for this is 1/2/3.
SHUTTER menu
z
When “FIX” has been selected in MODE, the options
available in SPED are as follows.
1/60, 1/100, 1/120, 1/250, 1/500, 1/1000,
1/2000, HALF, 180.0d, 172.8d, 144.0d, 120.0d,
90.0d, 45.0d
The values that can be selected in SPED differ
depending on the settings of the SYSTEM MODE
menu option in this unit. The menu item SYSTEM
MODE is found in the <SYSTEM MODE> screen on
the SYSTEM SETTING page.
z
SYNCRO SCAN DISP is added to the 2nd layer.
When “S.S” has been selected in MODE, it is possible
to select between SEC and DEG as units for the
values displayed in SPED. The changes to the units
are reflected in this unit.
z
When “S.S” has been selected in MODE, the variable
ranges of SPED are as follows.
For SEC: 1/24.7 - 1/7200 (selectable values differ
depending on the settings of this unit)
For DEG: 3.0d - 350.0d
SKIN DTL menu
z
The options available in OUTPUT are as follows.
MONI, SDI
z
A zebra is added to the colors of the table selected in
SDTL.
z
SCORG of the 3rd layer changes to SKIN-DTL-
EFFECT. The variable range for this is 0 - 31.
FUNC menu
z
The options available in SELECT of the 4th layer are
as follows.
INH, S.GAIN, DS.GAIN, S.IRIS, I.OVR, S.BLK,
B.GAMMA, D.ZOOM, ATW, ATW LOCK, Y GET,
DRS, ASSIST, C.TEMP, AUD CH1/3, AUD CH2/4,
REC SW, RET SW, PRE REC, SLOT SEL, PC
MODE, LCD B.L
Note, however, that the C.TEMP function will not work
when assigned to a user button on AJ-RC10G.
z
The variable range of BLK-GAMMA of the 5th layer is
–8 - OFF - 8.
z
RANGE is added next to BLK-GAMMA of the 5th
layer. The variable range for this is 1 - 3.
AJ-HPX3100G(VQT3A79)_E.book 144 ページ ２０１０年９月１７日 金曜日 午後９時２１分
