174
Menu: Menu Description Tables
Note
z
The items indicated by
are the setting items for PAINT
MENU SW(
) R/W in the <SD CARD R/W SELECT> screen.
The items without
are the setting items for PAINT MENU
LEVEL R/W.
>
[SD CARD R/W SELECT] (page 193)
z
The
SKIN TONE DTL item operates separately from the
details set in the LOW SETTING, MID SETTING, HIGH
SETTING, ADDITION DTL, and CAMERA SETTING items.
SKIN TONE DTL
Items/
Data Saved
Adjustable
Range
Remarks
SKIN TONE
DTL
OFF
A
B
AB
For selecting the skin color table for
enabling the skin tone detail.
The skin color table is provided in the
DETECT TABLE item.
By enabling the skin tone detail, it is
possible to shoot human skin more
accurately.
S C U F R
ZEBRA VF
ON
OFF
For the setting to display the zebra
pattern in the skin tone area displayed in
the viewfinder screen.
The zebra pattern is displayed when this
item is turned “ON” and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
S C U F R
ZEBRA SDI
OUT
ON
OFF
For setting to include the skin tone zebra
in the SDI OUT signal.
The zebra pattern is displayed when this
item is turned “ON” and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
S C U F R
ZEBRA
MONI
ON
OFF
For setting to include the skin tone zebra
in the MON OUT signal.
The zebra pattern is displayed when this
item is turned “ON” and the <SKIN TONE
DTL> screen is opened.
The zebra pattern indicates the area
which is selected in the SKIN TONE DTL
item.
S C U F R
DETECT
TABLE
A
B
For selecting the skin color table for
subjects to which the skin tone table
applies.
S C U F R
SKIN TONE
GET
For fetching the color information of A or
B, which is selected in the DETECT
TABLE item, near the center marker.
When this function is executed, data from
I CENTER to Q PHASE are fetched
automatically.
The fetched data will be the table data of
A or B, which is selected in the DETECT
TABLE item.
It is impossible to obtain color information
of both A and B at the same time.
– – – – –
SKIN DTL
EFFECT
0
:
16
:
31
For setting the effect level of the skin tone
detail.
S C U F R
Y MAX
000
:
190
:
255
For setting the maximum value of
brightness for enabling the skin tone.
S C U F R
Y MIN
000
:
010
:
255
For setting the minimum value of
brightness for enabling the skin tone.
S C U F R
I CENTER
000
:
035
:
255
For setting the center position on the I
axis (for setting an area that enables skin
tone.)
S C U F R
I WIDTH
000
:
055
:
255
For setting the area width for enabling the
skin tone on the I-axis of which the center
is the I CENTER.
S C U F R
Q WIDTH
00
:
10
:
90
For setting the area width for enabling the
skin tone on the Q-axis of which the
center is the I CENTER.
S C U F R
Q PHASE
–180
:
+000
:
+179
For setting phases of the area for
enabling skin tone as setting the standard
to the Q-axis.
S C U F R
KNEE/LEVEL
Items/
Data Saved
Adjustable
Range
Remarks
MASTER PED –200
:
+015
:
+200
Set the master pedestal.
S C U F R
MANUAL
KNEE
ON
OFF
Set the mode when the AUTO KNEE
switch is OFF. The KNEE MASTER
POINT/SLOPE set value is enabled when
this setting is ON.
S C U F R
KNEE
MASTER
POINT
70.0%
:
93.0%
:
107.0%
For setting the knee point position in
increments of 0.5% steps.
S C U F R
KNEE
MASTER
SLOPE
00
:
85
:
99
For setting the inclination of the knee.
S C U F R
WHITE CLIP ON
OFF
Set the WHITE CLIP feature to ON or
OFF. The WHITE CLIP LVL set value is
enabled when this setting is ON.
S C U F R
WHITE CLIP
LVL
90%
:
109%
Set WHITE CLIP LEVEL.
S C U F R
Items/
Data Saved
Adjustable
Range
Remarks
R-Y
B-Y
Q-WIDTH
I-WIDTH
Q-PHASE
I-CENTER
Y
Y-MAX
Y-MIN
0
–
direction
+ direction
= SKIN TONE AREA
AJ-HPX3100G(VQT3A79)_E.book 174 ページ ２０１０年９月１７日 金曜日 午後９時２１分
