E-8
E
N
G
L
IS
H
Connecting the microP2 Drive to a Personal
Computer
1
Connect the supplied USB cable to
the USB 3.0/USB 2.0 connector on
the microP2 drive.
2
Connect the other end of the USB
cable to a USB 3.0/USB 2.0 port on a
personal computer.
The access indicator lights and then goes
out and a drive letter for the microP2 drive
appears on the personal computer.
3
If this is the first time that you will use the microP2 drive, install
the USB driver.
For how to install the driver for Windows, refer to “Installing the USB Driver
for Windows” on page E-11 of this manual.
For how to install the driver for Macintosh, refer to “Installing the USB Driver
for Macintosh” on page E-11 of this manual.
USB cable
• Use the supplied 1.0 m USB cable.
• Do not transport the microP2 drive with the USB cable connected. The microP2
drive may be damaged.
USB 3.0