AG-MSU10
AJ-PCD30
AJ-PCD35
AJ-PCD2G
14
AG-MSU10 Specification
Power Source :
DC 7.2 V, with battery / DC 7.9 V, with AC adaptor
Current Consumption : 1.1 A
Weight:
AG-MSU10: approx. 770
g
(1.69 lb) without SSD and Battery
AG-MBX10G: approx. 135
g
(0.3 lb) without SSD
Dimensions (W x H x D): 99 mm x 58 mm x 212 mm, excluding protrusions
(3-15/16 inches x 2-5/16 inches x 8-3/8 inches)
AG-MSU10
Fast Copying from P2 Cards to a Removable Solid-State Drive
*1
• Data can be copied from a P2 card to an SSD (up to 2 TB capacity)
at about 4x normal speed in AVC-Intra100.*
2
• Equipped with a eSATA/USB 2.0 host/device interface. Data can be transferred
from a P2 card to an external HDD, and from an SSD to a PC.*
3
*
4
• eSATA/USB 2.0 terminals are also featured on the removable interface box,
allowing direct PC connection.*
3
• Battery driven with a compact, lightweight and durable design.
*1: The removable SSD is not included with the product. Use a commercially available removable SSD that is
recommended by Panasonic. In addition to the removable SSD interface box that comes with the
AG-MSU10 as a standard accessory, an additional AG-MBX10G can be purchased as an option. Do not use
Hard Disk Drive instead of an SSD. For compatible SSD information, please refer to the following WEB site.
http://pro-av.panasonic.net/en/sales_o/p2/ag-msu10/
*2: Without verification. File transfer speed varies depending on the SSD and external HDD writing speed,
transferred files, P2 card version, and other conditions.
*3: A Device mode eSATA terminal is provided on the included removable SSD interface box. In Host mode, files
can be transferred only between a P2 card and an external HDD. Files cannot be transferred between an
internal SSD and an external HDD. The P2 card/SSD can be used in Device mode, but reading and writing
with the P2 card is only possible with the USB 2.0 interface.
*4: When using a P2 CMS (described on page 17), be sure to use the newest version.
AJ-PCD30 Specification
Power Source:
DC 16 V 0.6 A with AC adaptor, DC 12 V 0.8 A when PC built-in
AC Adaptor:
AC 100 V to 240 V (1.20 A), 50 Hz/60 Hz
Weight:
approx. 1.2 k
g
(2.6 lb)
Dimensions (W x H x D): 148.4 mm x 42.5 mm x 199.5 mm, excluding protruding parts
(5-7/8 inches x 1-11/16 inches x 7-7/8 inches)
PC System Requirement: Microsoft Windows 7 Professional (SP1), Ultimate (SP1) 32 bit/64 bit
Microsoft Windows Vista Business (SP2), Ultimate (SP2) 32 bit/64 bit
Microsoft Windows XP Professional (SP3) 32 bit
Mac OS X 10.5, 10.6, 10.7 (Intel® based Mac)
1 GB or more memory
AJ-PCD30
USB3.0 Interface
Super Speed USB 3.0 Interface Boosts Workflows
for News and Other Productions
• The USB 3.0 interface lets you transfer P2 files at 1.5 Gbps or higher* when
connected to a USB 3.0-compatible PC.
• Install the P2 drive into a 5 type bay on a desktop PC.
• With the AC adaptor, you can use it as a stand-alone external drive.
* When using multiple E Series P2 cards. The actual transfer rate varies depending on the file being
transferred, the system, the application software, the P2 card version and other conditions. If the PC does
not have a USB 3.0 interface, data is transferred via USB 2.0. The P2 card driver software (provided with
the product or downloadable for free) must be installed to read data from or write data to P2 cards.
Please read “Notes Regarding the Handling of P2 Files Using a PC” on the back page.
mobile storage Unit “P2 msU”
memory Card drive “P2 drive”
memory Card drive “P2 drive”
memory Card drive “P2 drive”
AJ-PCD35 Specification
Power Source:
DC 16 V 0.6 A with AC adaptor, DC 12 V 0.8 A when PC built-in
AC Adaptor:
AC 100 V to 240 V (1.20 A), 50 Hz/60 Hz
Weight:
approx. 1.2 k
g
(2.6 lb)
Dimensions (W x H x D): 148.4 mm x 42.5 mm x 199.5 mm, excluding protruding parts
(5-7/8 inches x 1-11/16 inches x 7-7/8 inches)
PC System Requirement: Microsoft® Windows 7 Professional (SP1), Ultimate (SP1) 32bit/64bit
Microsoft Windows Vista® Business (SP1, SP2),
Ultimate (SP1, SP2) 32bit/64bit
Microsoft Windows XP Professional (SP2, SP3) 32 bit
Mac OS X 10.4, 10.5, 10.6, 10.7 (Intel® based Mac)
1 GB or more memory
AJ-PCD35
PCI Express Interface
Five P2 card Slots and High Speed PCI Express Interface
AJ-PCD2G Specification
Power Source:
DC5 V 0.5 A
Weight:
approx. 200
g
(0.44 lb) main unit only
Dimensions (W x H x D): 97 mm x 25.5 mm x 113 mm, excluding protruding parts
(3-7/8 inches x 1-1/16 inches x 4-1/2 inches)
PC System Requirement: Microsoft Windows 7 Professional (SP1), Ultimate (SP1) 32 bit/64 bit
Microsoft Windows Vista Business (SP2), Ultimate (SP2) 32 bit/64 bit
Microsoft Windows XP Professional (SP3) 32 bit
Mac OS X 10.5, 10.6, 10.7 (Intel® based Mac)
512MB or more memory (Windows Vista, Windows 7,
Mac OS X 10.6, 10.7 1GB or more memory)
AJ-PCD2G
USB2.0 Interface
Compact, Lightweight, Low-Cost — USB-Bus-Powered
1-Slot P2 drive Ideal for Mobile Applications
• USB bus powered operation, connecting to a PC or a Mac
with USB cables (2 cables*
1
).
• Compact of 25.5 mm (1-1/16 inches) thick, lightweight of 200
g
(0.44 lb) and low-cost.
• Comes with driver software for both Windows and Mac OS X.
*1: One cable for data transmission and power supply, and the other cable exclusively for power supply.
*The included P2 driver must be installed in the Windows PC or Mac. Please read “Notes Regarding the
Handling of P2 Files Using a PC” on the back page.
• High speed data transfer to Windows PC/Mac based Nonlinear Editor.
• Install the P2 drive into a 5 type bay on a desktop PC.
• With the AC adaptor, you can use it as a stand-alone external drive.
*The included P2 driver must be installed in the Windows PC or Mac. Please read “Notes Regarding the
Handling of P2 Files Using a PC” on the back page.
