– 110 –
Chapter 5 Playback — Thumbnail operations
Loading clip metadata (metadata upload)
Fig. 1
Fig. 2
1
Insert the SD memory card that contains the clip metadata (metadata upload file).
2
Select [LOAD] in the main menu
→
[RECORDING SETUP]
→
[REC META DATA] and press the control stick.
The metadata name of the metadata upload file on the SD memory card is displayed. (Fig. 1)
3
Use the control stick to select the file to be loaded, and select [YES].
f
Upload starts.
f
Uploaded metadata is retained even if the power is turned off.
f
For confirmation of uploaded data, refer to “Checking and modifying uploaded metadata” (page 110).
@
@
NOTE
t
While displaying metadata names, press the control stick to the right to switch to file name display. (Fig. 2)
Press the control stick to the left to return to metadata name display.
Checking and modifying uploaded metadata
Details of metadata uploaded from an SD memory card can be checked.
Fig. 1
Fig. 2
1
Select [PROPERTY] in the main menu
→
[RECORDING SETUP]
→
[REC META DATA].
The metadata list is displayed.
2
Use the control stick to move the cursor over the item to be checked, and press the control stick. (Fig. 1)
Settings of the uploaded metadata can be checked.
3
While checking the settings for the metadata, use the control stick to move the cursor over the item that you want to change the
setting, and press the control stick.
f
A software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
f
While holding down the <SHIFT> button, press the control stick upward/downward to move the cursor to the first/last of the setting items.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu
→
[RECORDING SETUP]
→
[REC META DATA]
→
[RECORD]. [OFF] is set in the factory settings.
Selecting the [USER CLIP NAME] recording method
Select the [USER CLIP NAME] recording method from the two of [TYPE1] and [TYPE2] in the main menu
→
[RECORDING SETUP]
→
[REC META
DATA]
→
[USER CLIP NAME].
r
[TYPE1] (factory settings)
Status of clip metadata
[USER CLIP NAME] to be recorded
When clip metadata has been loaded
Uploaded data
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [GLOBAL CLIP ID]
Summary of Contents for AJ-PX230 Series
Page 12: ...Before using the camera read this chapter Chapter 1 Overview ...
Page 153: ...Maintenance of the camera or frequently asked questions are described Chapter 9 Maintenance ...
Page 161: ...This chapter describes the specifications of this product Chapter 10 Specification ...
Page 169: ...Web Site http www panasonic com Panasonic Corporation 2016 ...
