– 102 –
Chapter 5 Playback — Thumbnail operations
Setting the clip information display
You can customize the clip information display contents according to your preference.
1
Select [DATA DISPLAY] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP].
2
Use the control stick to move the cursor on the item you want to set.
3
Press the control stick.
Setting items that display properties
You can set simple properties item displayed on the left of the thumbnail.
Fig. 1
Fig. 2
1
Open the thumbnail screen. (Fig. 1)
2
Select [PROPERTY DISP.] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP].
3
Press the control stick to enter the item menu. (Fig. 2)
The selected item has a check mark on it.
4
Press the control stick.
Pressing the control stick will check unchecked items, and uncheck the checked items.
@
@
NOTE
t
Property items can be displayed by selecting [SMALL] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP]
→
[THUMBNAIL SIZE].
t
A maximum of six items can be displayed at the same time.
t
When six items are already selected, all unchecked items cannot be selected. You can change your item selection by unchecking selected items.
Changing thumbnails
Replace thumbnails with images that include previously attached text memos while images are recorded or played back.
Fig. 1
Fig. 2
1
Add text memos to images to be changed.
For details on adding text memos, refer to “Text memo recording function” (page 69).
2
Select [TEXT MEMO CLIPS] in the main menu
→
[CLIP]
→
[REPOSITION] and display the thumbnails of clips with text memos.
3
Move the cursor over the clip that you want to change the thumbnail and press the control stick, and then move the cursor to the
text memo display on the lower row.
4
Select thumbnail to be replaced from the text memos, place the cursor on it, and select [EXCH. THUMBNAIL] in the main menu
→
[CLIP]. (Fig. 1)
5
Press the control stick, and on the confirmation screen displayed, select [YES] using the control stick. (Fig. 2)
The menu closes and the thumbnail for the clip is replaced.
