– 118 –
Chapter 6 Menu Operations — Menu list
Menu list
[SCENE FILE]
Configure the settings regarding scene files.
This menu is used to set fine image quality settings of the camera images, select scene files, and read/write scene file data to the internal memory.
These menu items cannot be set when the thumbnail screen is displayed.
Item
Description of settings
[FILE SELECT]
Selects the scene file (1 to 6).
[F1:], [F2:FLUO.], [F3:SPARK], [F4:B-STR], [F5:CINE V], [F6:CINE D]
f
Factory setting: [F1:]
[NAME EDIT]
Edits the name of the scene file selected in the scene file menu. (Maximum of six characters)
[LOAD/SAVE/INITIALIZE]
Loads/saves/initializes the setting values allocated on the current scene file number (any one from 1 to 6).
[LOAD]:
Selects and loads a scene file saved in the camera memory.
[SAVE]:
Specifies a title and file number for the current setting values and saves them as a scene file in
the camera memory.
[INITIALIZE]:
Initializes the selected scene files (1 to 6) to the factory settings.
[VFR]
Sets permission/prohibition of the variable frame rate (VFR).
[ON], [OFF]
f
Factory setting: [OFF]
[FRAME RATE]
Switches the shooting interval and exposure time when [VFR] is [ON].
When [SYSTEM MODE] = 59.94 Hz:
[60fps], [54fps], [48fps], [44fps], [40fps], [36fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps],
[25fps], [24fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
When [SYSTEM MODE] = 50 Hz:
[50fps], [48fps], [45fps], [42fps], [37fps], [34fps], [32fps], [30fps], [28fps], [27fps], [26fps], [25fps],
[24fps], [23fps], [22fps], [21fps], [20fps], [18fps], [15fps], [12fps], [9fps], [6fps], [4fps], [2fps], [1fps]
f
Factory setting: [30fps] (when [SYSTEM MODE] = 59.94 Hz), [25fps] (when [SYSTEM MODE] = 50 Hz)
[SYNC SCAN TYPE]
Switches the synchro scan display settings.
[sec]:
Displays in time.
[deg]:
Displays at shutter open angle.
f
Factory setting: [sec]
[SYNCHRO SCAN]
Displays the speed of the synchro scan shutter that is used when shooting video for television etc.
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz:
f
60i/60p:
[1/60.0]…[1/249.8]
f
30P:
[1/30.0]…[1/249.8]
f
24P:
[1/24.0]…[1/249.8]
When [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 50 Hz:
f
50i/50P:
[1/50.0]…[1/250.0]
f
25P:
[1/25.0]…[1/250.0]
When [SYNC SCAN TYPE] = [deg] (in 0.5 d steps, angle display):
[3.0d]…[360.0d]
f
Factory setting: [1/60.0] (when [SYNC SCAN TYPE] = [sec], and [SYSTEM MODE] = 59.94 Hz)
[MASTER DTL]
Sets the level of the detail effect of the whole part.
[
−
31]…[31]
f
Factory setting: [0]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
[0]…[60]
f
Factory setting: [1]
[DETAIL SETTING]
[DETAIL]
Sets [ON]/[OFF] of the detail function.
[ON], [OFF]
f
Factory setting: [ON]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
[
−
7]…[7]
f
Factory setting: [0]
[H.DTL FREQ.]
Sets the thickness of the detail level in the horizontal direction.
[
−
7]…[7]
f
Factory setting: [0]
[V. DTL FREQ.]
Sets the thickness of the detail level in the vertical direction.
[0]…[2]
f
Factory setting: [1]
[LEVEL DEPEND.]
When the detail of luminosity signal is emphasized, details in the darker parts are compressed.
Details of bright areas are also compressed more when the value set for [LEVEL DEPEND.] is larger.
[
−
7]…[7]
f
Factory setting: [0]
[KNEE APE LVL]
Sets the detail level of high luminosity areas (high-brightness areas).
[0]…[5]
f
Factory setting: [2]
[DTL GAIN(
+
)]
Sets the detail level of
+
direction (to make brighter).
[
−
31]…[31]
f
Factory setting: [0]
[DTL GAIN(
−
)]
Sets the detail level of
−
direction (to make darker).
[
−
31]…[31]
f
Factory setting: [0]
