manualshive.com logo in svg

Panasonic AJ-PX270EJ, Operating Instructions Manual

The Panasonic AJ-PX270EJ is a professional handheld camcorder, capable of capturing high-quality video footage. Ensure optimal performance with the comprehensive Operating Instructions Manual available for free download at our website. Explore advanced features and settings effortlessly with this user-friendly manual, providing detailed instructions for all your filming needs.

Share
Download
background image

– 105 –

Chapter 5 Playback — Thumbnail operations

@

@

NOTE

 

t

You can restore clips with yellow defective clip indicators. Delete clips with red defective clip indicators. If the clips cannot be deleted, format the P2 
card.
During restoration of the clips, however, the defective clip indicator may change from yellow to red, and result in the inability to restore the clips.

Reconnecting incomplete clips

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied from each card. The reconnection 
function generates one clip (the original, connected clip) from incomplete clips.

1 

Use the control stick to select incomplete clips to be linked.

Usually, thumbnails of incomplete clips (clips with   indication) are displayed next to each other.

2 

Select [RE-CONNECT] in the main menu 

→

 [CLIP] and press the control stick.

3 

Select [YES] using the control stick.

This reconnects incomplete clips.

@

@

NOTE

 

t

Incomplete clip indicators will remain displayed when only some clips are reconnected, unless all the constituent clips of the original clip are 
reconnected.

Copying clips

Selected clips can be copied to a P2 card or a connected USB storage device in the desired slot.

1 

Use the control stick to move the cursor over the clip to be copied, and press the control stick to select the clip.

2 

Move the cursor to the copy target from the [COPY] list in the main menu 

→

 [CLIP] and press the control stick.

 

f

When multiple clips are selected, the number of selected clips is displayed after pressing the control stick.

 

f

If the copy destination is a storage device, select the copy destination properties.

3 

Move the cursor to [YES] in the confirmation message and press the control stick.

This starts copying of the clip.

4 

When the completion message appears, press the control stick.

@

@

NOTE

 

t

Turning off the power or inserting/removing a card during copying may damage the P2 card. If you accidentally make these mistakes, it can result in 
defective clips. After deleting the defective clips redo copying.

 

t

Copying is not performed when the following error messages are displayed.
-  [LACK OF CAPACITY!]

Copying could not be performed because the recording capacity of the copy destination is insufficient.

-  [UNKNOWN CONTENTS FORMAT!]

Copying could not be performed because a defective clip is selected.

-  [NO COPY TO SAME CARD!]

Copying could not be performed because you are attempting to copy to the same card.

-  [TOO MANY CLIPS!]

Copying could not be performed because there are too many clips selected.

 

t

If the copying is performed while a text memo is selected in the lower part of the text memo, the section between the selected text memo position and 
the next text memo will be copied. If no text memo is found after the selected one, then the part after the selected text memo to the end of the clip is 
copied. For details, refer to “Using a text memo to divide a clip and copy the necessary portion” (page 104).

 

t

To interrupt copying, press the <SHIFT> button 

+

 <EXIT> button, or the control stick to cancel the operation. The clip being copied will be deleted from 

the copy destination.

 

t

When identical clips (same [GLOBAL CLIP ID]) exist on the destination, [OVERWRITE?] is displayed. Select [YES] when overwriting the clip, and 
select [NO] when not overwriting the clip.

Setting clip metadata

Information such as the name of the person who shot the video, the name of the reporter, the shooting location, or text memos can be loaded from an 
SD memory card, and can be recorded as clip metadata.

Clip metadata items

Clip metadata includes the following items. Underlined items can be set by loading the metadata upload file on the SD memory card. Other items are 
set automatically during shooting. Using the latest update version of P2 Viewer Plus, metadata upload files can be written to SD memory cards using a 
computer. Download and install the latest version of P2 Viewer Plus from the following website.
http://pro-av.panasonic.net/
For details on SD memory cards to be used, refer to “Cautions when using SD memory cards” (page 18).

@

@

NOTE

 

t

Files which were not edited by P2 Viewer Plus are displayed as [UNKNOWN DATA!] and may not be readable.

[GLOBAL CLIP ID]

Displays the global clip ID that shows the shooting status of the clip.

[USER CLIP NAME]

Displays the clip name set by the user.*

1

Summary of Contents for AJ-PX270EJ































































































































































































Reviews:

No comments

Related manuals for AJ-PX270EJ

eLine ELI-SIP-MVD-R Instruction Manual preview
ELI-SIP-MVD-R
Brand: eLine Pages: 38
Konica Minolta MAXXUM 2500D Instruction Manual preview
MAXXUM 2500D
Brand: Konica Minolta Pages: 19
Wizard-tk ON-SQ13 User Manual preview
ON-SQ13
Brand: Wizard-tk Pages: 5
Panasonic Palmcorder PV-A286 User Manual preview
Palmcorder PV-A286
Brand: Panasonic Pages: 40
Panasonic Palmcorder PV-A216 User Manual preview
Palmcorder PV-A216
Brand: Panasonic Pages: 36
Panasonic SDR-H90P Service Manual preview
SDR-H90P
Brand: Panasonic Pages: 64
Panasonic PV-L751 Operating Instructions Manual preview
PV-L751
Brand: Panasonic Pages: 60
Panasonic PV-530D Operating Instructions Manual preview
PV-530D
Brand: Panasonic Pages: 44
Panasonic Palmcorder PV-DV401 Operating Manual preview
Palmcorder PV-DV401
Brand: Panasonic Pages: 80
Panasonic Palmcorder PV-DV701 Operating Manual preview
Palmcorder PV-DV701
Brand: Panasonic Pages: 80
Panasonic PV-GS80 Operating Instructions Manual preview
PV-GS80
Brand: Panasonic Pages: 84
Panasonic SDR-H40P/PC Operating Instructions Manual preview
SDR-H40P/PC
Brand: Panasonic Pages: 128
Panasonic NV-VZ14PN Operating Instructions Manual preview
NV-VZ14PN
Brand: Panasonic Pages: 152
Canon EOS C100 Brochure & Specs preview
EOS C100
Brand: Canon Pages: 2
Canon Auto Zoom 814 Instructions Manual preview
Auto Zoom 814
Brand: Canon Pages: 39
Canon AutoZoom Electronic 512XL Instructions Manual preview
AutoZoom Electronic 512XL
Brand: Canon Pages: 24
Canon ELURA 100 - Camcorder - 1.3 MP Instruction Manual preview
ELURA 100 - Camcorder - 1.3 MP
Brand: Canon Pages: 100
Canon Auto Zoom 318 M Instructions Manual preview
Auto Zoom 318 M
Brand: Canon Pages: 28

Brands by name

Popular brands

Load more brands